The Ultimate Big Gator Set - 10 Pc Set - V-DrillGuides & V-TapGuides - Standard & Metric Sizing

The Ultimate Big Gator Set is a 10 piece set of 6 drill guides & 4 tap guides. The drill guides are like having a drill press for precision alignment while the tap guides start every hole straight and helps prevent tap breakage! All the guides have a v-groove on the bottom to allow you to work on corners or round surfaces. All guides have a ground base to be used on flat surfaces. Each guide is heat-treated for durability allowing a tight tolerance. The guides work great on corners round and flat surfaces.100% American-made quality and a Lifetime Warranty on every guide! Set includes one Standard V-DrillGuide - (33/64 -5/8 ) one Standard V-DrillGuide - (3/8-1/2 ) one Metric V-DrillGuide (10 - 14mm) one Standard V-DrillGuide - (1/8-3/8 ) one MINI V-DrillGuide one Metric V-DrillGuide 3-9.5mm one Standard V-TapGuide one Metric V-TapGuide one STI-UNC V-TapGuide (coarse threads) and one STI-UNF V-TapGuide (fine threads). Drill Guide = V-DrillGuide. The drill guide is like a portable drill press with accuracy. These guides eliminate guessing when perfection is required. Drill Bit Guide is Easy to Use: hold the V-DrillGuide on the material clamp & drill. Easy! A V-TapGuide is a tap guide that answers the call to accurately guide hand tapped threads on the inside of a hole to accept a machine screw or bolt. If you start every hole straight it will help prevent tap breakage and increase the tap life. The tap guide is easy to use: place the tap guide on the work surface with the v-groove side resting on the surface. Insert the tap through the guide into the pre-drilled hole and turn it clockwise. The tap will then be aligning perpendicularly using the guide as the base; this will ensure a straight and accurately tapped hole. Every few turns back the tap out counter-clockwise to clear the chips. Lifetime Warranty on all drill & tap guides. Drill & Tap Straight - Every Time!