Complete Metric Big Gator Set - 3 PC Set - V-DrillGuides & V-TapGuide -Metric Sizing

Complete Metric Big Gator Set is a 3 piece set of 2 drill guides & 1 tap guides. The drill guides are like having a drill press for precision alignment while the tap guides start every hole straight and helps prevent tap breakage! All the guides have a v-groove on the bottom to allow you to work on corners or round surfaces. All guides have a ground base to be used on flat surfaces. Each guide is heat-treated for durability allowing a tight tolerance. The guides work great on corners round and flat surfaces.100% American-made quality and a Lifetime Warranty on every guide! Set includes one Metric V-DrillGuide - (10-14mm) one Metric V-DrillGuide - (3-9.5mm) and one Metric V-TapGuide. Drill Guide = V-DrillGuide. The drill guide is like a portable drill press with accuracy. These guides eliminate guessing when perfection is required. Drill Bit Guide is Easy to Use: hold the V-DrillGuide on the material clamp & drill. Easy! A V-TapGuide is a tap guide that answers the call to accurately guide hand tapped threads on the inside of a hole to accept a machine screw or bolt. If you start every hole straight it will help prevent tap breakage and increase the tap life. The tap guide is easy to use: place the tap guide on the work surface with the v-groove side resting on the surface. Insert the tap through the guide into the pre-drilled hole and turn it clockwise. The tap will then be aligning perpendicularly using the guide as the base; this will ensure a straight and accurately tapped hole. Every few turns back the tap out counter-clockwise to clear the chips. Lifetime Warranty on all drill & tap guides. Drill & Tap Straight - Every Time!