SpeedyBee TX500 5.8G 48CH 25/200/500mW Switchable Video Transmitter Built-in MIC for FPV RC Airplane

SpeedyBee TX500 5.8G 48CH 25/200/500mW Switchable Video Transmitter Built-in MIC for FPV RC Airplane Description: Item number: SpeedyBee TX500 Frequency Channel: 5.8G 48CH Output Power: 25mW / 200mW/ 500mW Working Current: 5V@ 150mA Voltage out: 5V@max 250mA Voltage in: 1S 3.5-5.5V Video Input Impedance: 75 Ohm Antenna Connector: MMCX Weight: 4g (without antenna) PCB Size: 28mm*28mm@20*20 M2 Frequency Setup The factory default setting is in lock mode with red LED blinking and only 25mW is available. You can switch to unlock mode by long pressing the button for 10 seconds with the red LED constantly on. Note: Before you get VTX unlocked, it is highly recommended to know about the rules and regulations in your country about the frequency to avoid a fine or confiscation of your device. Button Function Switching Short press to CH; Long press 2 seconds to BAND; Long press 5 seconds to POWER; Long press 10 seconds to Unlock/Lock Mode. Frequency Table: Channel CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 1 BosCam A 5865 5845 5825 5805 5785 5765 5746 5725 2 BosCam B 5733 5752 5771 5790 5809 5828 5847 5866 3 BosCam E 5705 5685 5665 5645 5885 5905 5925 5945 4 FatShark 5740 5760 5780 5800 5820 5840 5860 5880 5 Race Band 5658 5695 5732 5769 5806 5843 5880 5917 6 Low Race 5362 5399 5436 5473 5510 5547 5584 5621 Flight Controller Wiring: SpeedyBee TX500 5.8G 48CH Video Transmitter Manual, click here Package Included: 1 X TX500 1 X MMCX antenna 1 X MMCX to SMA Cable 1 X 1.0mm 6pin Cable 1 X Set of screws