48Pcs Pneumatic Sander Eccentric Pneumatic Grinder Rear Exhaust For Pray Polishing Burrs Rust Removal Detail Trimming American Air Nozzle European Air Nozzle Japanese Air Nozzle

48Pcs Pneumatic Sander Eccentric Pneumatic Grinder Rear Exhaust for Pray Polishing Burrs Rust Removal Detail Trimming American Air Nozzle European Air Nozzle Japanese Air Nozzle Specification: Item Type: Air SanderOptional Style: American Air Nozzle European Air Nozzle Japanese Air NozzleMaterial: Stainless steel Model: AT-1500H48 No-Load Speed: 15000 rpm Air Inlet Size: 1/4 inch Compressed Air : 8CFM Exhaust Direction: Rear exhaust Air Connection Screw: 1/4-19NPT Noise Value: Less than 83DB Suggested Air Tube Inner Diameter: Approx. 6.3mm / 0.2in Category: Oscillating Pneumatic Eccentric Grinding Machine Refueling Tips for Eccentric Pneumatic Grinder: 1. This machine is highly accurate. When it is running the Speed is high. Once any fine sand or iron filings enter the movement it may cause the blade to break and cause the machine to malfunction so make sure that the air inlet is clean. 2. Be sure to use an oil-water separator and drain regularly to ensure that the machine is dry. 3. Before use every day be sure to add 3~5 drops of pneumatic oil to the air inlet of the machine and connect the air to idle. Need to Know for Changing Disc of Eccentric Pneumatic Grinder: 1. Locate the keyhole. 2. Insert the positioning pin into the lock hole and keep the pin still. 3. Turn right and replace the sand pad.Size: Approx. 2.5cm / 1in5.1cm / 2in 7.6cm / 3in Package List: 1 x Sander 3 x 1 Inch/2 Inch/3 Inch Polishing Disc 9 x 1 Inch / 2 Inch / 3 Inch Flat Sponge Pad 9 x 1 Inch / 2 Inch / 3 Inch Wave Sponge Pad 3 x 1 Inch / 2 Inch / 3 Inch Microfiber Mat 6 x 1 Inch / 2 Inch / 3 Inch Artificial Wool Pad 15 x 1 Inch/2 Inch/3 Inch Sandpaper 1 x Positioning Lock 1 x 1/4 Air Inlet Connector