AT-1500R60 Pneumatic Polisher Eccentric Pneumatic Grinder Air Sander 60Pcs With 3MM Yaw Removing Burrs For Spraying Polishing European Air Nozzle

AT-1500R60 Pneumatic Polisher Eccentric Pneumatic Grinder Air Sander 60Pcs With 3MM Yaw Removing Burrs for Spraying Polishing European Air Nozzle Specification: Item Type: Air Sander Material: Stainless steel Model: AT-1500R60 No-Load Speed: 15000 rpm Air Inlet Size: Approx. 0.6cm / 0.25in Compressed Air : 8CFM Exhaust Direction: Rear exhaust Air Connection Screw: 1/4-19NPT Noise Value: Less than 83DB Suggested Air Tube Inner Diameter: Approx. 6.3mm / 0.2in Category: Oscillating Pneumatic Eccentric Sander Refueling Tips for Eccentric Pneumatic Grinder: 1. This machine is highly accurate. When it is running the Speed is high. Once any fine sand or iron filings enter the movement it may cause the blade to break and cause the machine to malfunction so make sure that the air inlet is clean. 2. Be sure to use an oil-water separator and drain regularly to make sure that the machine is dry. 3. Before use every day be sure to add 3~5 drops of pneumatic oil to the air inlet of the machine and connect the air pump to idle. Need To Know For Changing Disc Of Eccentric Pneumatic Grinder: 1. Locate the keyhole. 2. Insert the positioning pin into the lock hole and keep the pin still. 3. Turn right and replace the sand pad.Size: Approx. 2.5cm / 1in5.1cm / 2in 7.6cm / 3in Package List: 1 x Air Sander 3 x 1 Inch / 2 Inch / 3 Inch Polishing Disc 15 x 1 Inch / 2 Inch / 3 Inch Flat Sponge Pad 3 x 1 Inch / 2 Inch / 3 Inch Microfiber Mat 6 x 1 Inch / 2 Inch / 3 Inch Wool Pad 30 x 1 Inch / 2 Inch / 3 Inch Sandpaper 1 x Locating Lock 1 x 1/4 Air Inlet Connector