20*20mm Zeez F7 2020 FC MPU6000 5V/3A BEC 6UARTS OSD 3-8S Flight Controller with Type-C RGB 128MB 8S Input for FPV Racin

Specifications Mounting Holes 20 20 Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation Up to 8S input max 36V 5V BEC up to 3A continuous STM32F722 MCU Support Betaflight INav Emuflight MPU6000 Gyro ACC for smooth performance 128MB Onboard flash OSD chip Onboard 6 available UARTS VTX switch to control the ON OFF of the VTXdirectly from your transmitter control via Betaflight with USER1 mode LC Filter for 5V VTX and Camera USB Type C connector Onboard RGB LED distribution for clean wiringto the LED on the arm of the quad 8 Onboard RBG LED compliant with FAI Rules Logic Side and USB current protectionFeatures Support up to 8S input with 5V 3A BEC protected from over current over temperature and short circuit for power all peripherals such as CAM VTX LED RX Build with STM32F722 MCU for best performance it support all most used firmware on the market like Betaflight EmuFlight and INAV MPU6000 Gyroscope and accelerometer combined with soft mount will give you the best clear signal that will track your motion Onboard 128MB flash to store all logs for days of flight VTX switch to power ON OFF your video transmitter directly from your radio enable it using USER1 in the modes tab of the firmware OSD Chip with all correct capacitor and LC filter will give clear voltage to the camera and the VTX Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 N