20*20mm Zeez 2020 Stack MPU6000 5V/3A BEC 6UARTS OSD 3-8S+Zeez 45amp 4-in-1 STM32L4 MCU ESC FPV Combo RC Stack for FPV R

Zeez F7 2020 Specifications Mounting Holes 20 20Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation Up to 8S input max 36V 5V BEC up to 3A continuousSTM32F722 MCU Support Betaflight INav Emuflight MPU6000 Gyro ACC for smooth performance128MB Onboard flashOSD chip Onboard6 available UARTSVTX switch to control the ON OFF of the VTXdirectly from your transmitter control via Betaflight with USER1 mode LC Filter for 5V VTX and CameraUSB Type C connectorOnboard RGB LED distribution for clean wiringto the LED on the arm of the quad 8 Onboard RBG LED compliant with FAI Rules Logic Side and USB current protectionZeez ESC 4IN1 45A 2020 Specifications Mounting Holes 20 203S to 6S inputConstant Current 45APeak Current 55ASTM32L4 MCU ARM Cortex M4 80MHz frequency BlHeli32 Firmware support Dshot150 Dhsot300 Dshot600 ProShot 1000 and still compatible with all older analog protocol OneShot42 OneShot125 Multishot 8 Pin JST connector and 8 Pin solder padsHoles for Aluminum Low ESR capacitor included 35V 470uF Low ESR capacitor and a spare capacitor Onboard analog current sensor Betaflight Scale 200 ESC telemetry to read RPM and ESC temperatureCompatible with Bidirectional Dshot out of the boxWEIGHT AND DIMENSIONS Weight including FC ESC 8X Standoff 4X Nut 8 Pin connector 19 9grDimensions L X W X H 41 6mm X 33 6mm X 19 6 mmZeez 2020 STACK without LED includes 1X Zeez F7 2020