2 Channel RF Wireless System Remote Control Switch Module with Shell 12V 10A 315MHz for Smart Home

Descriptions Channel 2 CH 2 channel work wayDecode Learning codeWorking Voltage DC 12V Output way Momentary defaults other model can change by yourself in work pin Maximum Load Current 10ARelay load 10A 220 110VReceiver Sensitivity 105dBmWorking temperature 40C 80CSize 68mm x 48mm x 15mm Working Model output way change method The Work model can change in the switch board work pin 1 Jog momentray All Model pin not connector 2 Self lock Self Latched Model pin1 Pin 2 Connector Or Pin2 pin 3 connector 3 Inter lock Latched Pin2 pin 3 Or Pin1 Pin2 Connector 1 Jog momentray Press one button is Working ON Loosen your finger on the same button is Stop OFF One channel switch need one buttons remote control 2 Self lock Self Latched Press one button for one time is working ON Press the same button again is stop OFF One channel switch need one buttons remote control 3 Inter lock Latched Press one button is working ON press another button is stop OFF One channel switch need 2 buttons remote control Add remote control method 1 Connector the switch to 12V 2 press the switch board learn button 1 3 second till the switch LED lighting 3 after press the remote control button A B till the switch LED lighting the relay will be ON or OFF 4 testthe controller control the switch press the control button the relay will be on and off you can hear it Remove Remote control 1 Connector the switch to 12V 2 Press the learning