iFlight SucceX-D F7 Stack (F7+50A ESC) for DJI FPV Air Unit FPV Racing Drone

PRODUCT DESCRIPTION The SucceX-D F7 is designed to work seamlessly with DJI's new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In addition, we add the popular and reliable USB Type-C instead of Mi.cro USB which makes the connection easily. Features: Un.iversal USB Type C connector instead of mi.cro USB Plug-and-Play. No need to solder tiny wires.) Supports BLHeli pass-through for easy ESC upgrade and configuration. Designed to support DJI Digital FPV. SucceX-D F7 TwinG SPECS: - MCU: 216MHz STM32F722RET6 - Gy.ro: 2x ICM20689 - Baro: YES - Betaflight OSD: YES - Blackbox: 32MB - 5 x Uarts - 8 x Motor outputs - 8 pin 4in1 ESC port - 4-pin VTX connector - Betaflight Firmware: betaflight_4.0.5_STM32F7X2.hex - CLI config: IFLIGHTF7_TWIN_G.config Physical: - Mounting hole: 30.5*30.5mm: 4mm with Grommets 3mm - Size: 36*36mm - Weight: 7.5g SucceX 50A BLHeli_32 4-in-1 ESC Features: - 8 layers double-sided PCB board; - 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity; - 32bit FO51K86 MCU, 48mHz maximum clock speed; - T.DK MLCC Low ESR ceramic capacitors; - Top grade NTMFS5C430NL MOSFET; - Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection Specification: - Dimension: 43*39mm - Mounting Holes: 30.5*30.5mm/3mm - Weight:14.4g - Volts input: 2-6S - STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware - Current sensor: Yes - Telemetry: Supported - BEC: No - Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc. - Target: iFlight-BL32-4IN1 - BLHeliSuite download (BL32) :http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file Package included: 1 x SucceX-D F7 TwinG FC 1 x SucceX 50A BLHeli_32 4-in-1 ESC