findmall 5 x4.92 Lock Down Precision Milling Machine Vise Without Base

Dimensions Jaw Width: 5 Jaw Opening: 4.92 Jaw Height: 1-1/2 Weight: 52 Lbs Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base Vise Key: 14.00mm table slot width 15.875mm base width Product features Each pound of force in horizontal induces 1/2 lb of downward force eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up even if it is held at the top of the jaw plates. Highest clamping power. It s very accurate and durable Sliding surface of the vise bed is flame hardened and ground Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28 000 PSI With Angle Lock / Lock Down Jaw. K type angle lock nut is made from the highest quality ductile Iron firm and durable Acme screws and easy to read 0-360 deg scales Screws from the top through the jaw make the vise more stable and durable. Taiwan new type Four setting positions of the jaw plates are available widening the jaw plates opening.