Zacuto Gratical HD Bundle for Canon C300 Mark II Camera

The Canon C300 Mark II EVF Recoil Pro V2 rig is a shoulder rig designed specifically for the Canon C300 Mark II camera. This is a Next Generation Recoil rig designed for optimal balance and comfort when shoulder mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body. In a shoulder mount rig, the balance point needs to be directly over your shoulder which puts the camera behind you. The Recoil rig adjusts for that balance point and relocates focus, monitoring and camera controls forward, creating a lighter, shorter and properly balanced rig. VCT Pro This baseplate has a sliding top plate for quickly removing the camera from the rig or fast lens changes, a built-in, curved shoulder pad, a v-wedge tripod connector (with 1/4"-20 and 3/8" 16 screw option). It has removable and extendable 6.5" iris rods and rows of 1/4"-20 screw holes along the sides for accessories. It has quick release 15mm rod parts in the rear. The recessed rod mount offers maximum accessory capable space under your camera lens. Canon Trigger Grip Relocates the Canon C100, Canon C300 and Canon C500 camera grip to a comfortable handgrip position for shoulder rigs. Our trigger grips are the most adjustable grips available. They allow for single-handed 360deg. rotation with the simple press of a trigger. The two handles rotate independently of each other. Flip them down for a low, rock-solid handgrip. Raise it up for more of an Aaton style position. Or quickly flip them both all the way up to set your camera flat on the ground or for storing in a case. Or stagger them if that is more comfortable to you. The length of the handgrips can also adjust by loosening a red lever and pulling the grip out or pushing in C300 Mark II Helmet Kit Mounts directly to the top of the C300 Mark II in place of the Canon top handle. Offers multiple 1/4"-20 and 3/8" 16 mounting screw holes to attach a variety of accessories as well as a spot to mount the C300 Mark II microphone. Includes the rock solid Recoil Handle top grip that accepts two coldshoe accessories and has a quick release 15mm rod port. Our handle allows you to quickly take the handle off for traveling. - Gratical HD Micro OLED EVF - The Gratical HD Micro OLED electronic viewfinder uses an extremely powerful FPGA dual-core processor and the latest Micro-OLED displays to provide a hugely expanded contrast range. Our Micro-OLED display supports high pixel density with unparalleled resolution, true blacks, gamma and contrast range. The Gratical HD has 5.4 million pixels on a 0.61" diagonal screen no bigger than the size of your thumbnail. The Gratical HD includes two HDMI and two SDI ports with cross conversion from HDMI to SDI. Weather resistant covers prevent moisture or debris from getting in open ports.You'll be amazed with how sharp the image is. The internal field of view is just the right size so that the image is large, but not so that your eye has to roam to see the entire image at once. It features a built in -1 to +4 diopter range and Zacuto's latest anti-fog coating formula. An auto-closing eyecup door prevents sunburn display automatically without any action by the operator. Mount the Gratical HD to your Next Generation Recoil via the 1/4-20 rosette on the side with an Axis Mini. You can also mount the Gratical HD with the 1/4-20 screw hole in the bottom. Included is the LP-E6 style battery with charger and universal plug adapters. - Axis Mini EVF Mount - The Axis Mini is the most adjustable ENG style mount for rosette mounted EVFs, giving you full 360 deg. motion with four adjustment points. Designed to attach to the top of your camera set up, it leaves plenty of room at the lens for focusing and will work with the widest of lenses. It can easily be adjusted with one hand while the rig is on your shoulder. The Axis Mini has extensive articulation for use with a variety of cameras, both shoulder mounted in a Next Generation Recoil or in tripod operating position.It is very small and quick to install and remove. The Axis Mini attaches to your rig via a required 15mm rod port at the top of a kit positioned perpendicular to your camera lens. Slide the Axis Mini into the 15mm rod port and clamp into place. The Axis Mini attaches to the EVF via a secure 1/4"-20 rosette mount. EVF's with a 1/4"-20 screw mount require the Quad Rail for use with the Axis Mini. The Axis Mini has three red tension levers that are controlled independently with 360 degree motion.Release all three levers to completely reposition the mount or release just one to make single segment adjustments. You can dial in the exact amount of tension needed at each lever to adjust on the fly. Just grab and move. If you are left eye shooter an additional extension is required.