Yucurem KB-075C 315MHz/433MHz Copy Remote Controller 4 Buttons Garage Opener Key

KB-075C Universal Copy Remote Controller 4 Buttons Garage Gate Door Opener Duplicator Clone Cloning Learning Code Car Key Feature: Using high-performance radio frequency chip crystal oscillator frequency stabilization accurate frequency point; Long transmission distance no directionality high transmission sensitivity no signal blocking; It can copy most of the fixed code and learning code wireless remote control the copy speed is fast and the operation is simple; After copying it will not affect the original remote control; Copy code automatically use directly no coding required; Range of use: duplication and regeneration of wireless remote controls such as barriers garage doors cars/motorcycles etc. The scope of application of the copy remote control: ordinary fixed code (chip type 2260 2262 2264) learning code (1527 2240) remote control. Specification: Type: Wireless remote control Model: KB-075C belt buckle Material: ABS Color: Black Button: A - Lock type/B - ABCD (optional) Number of buttons: 4 Rated voltage: 12V Wireless transmission distance: 50-150 (m) (open space) Working voltage: DC 12V Working current: 14mA Quiescent current: 0mA Working frequency: 315/433MHz (optional) Launch distance: 100m (open environment) Size: 90x60x13mm/3.54x2.36x0.51in Weight: 25g Operation method: 1. Code pairing (learning) Place the original remote control and the copy remote control as close as possible first press a button of the original remote control and then press a button of the self-copy remote control immediately after the indicator light turns on for about three seconds the LED will flash 3 times and then quickly Flashing it means that the address code of the original remote control button has been learned successfully. The other keys are operated in the same way for learning. 2. Clear code Press the unlock button and the lock button at the same time for 2 seconds the LED light starts to flash 3 times. At this time keep the lock button pressed and release the unlock button. Press the unlock button three or four times within 5 seconds and the indicator light flashes quickly. The code has been cleared. Test whether the existing code of the remote control has been successfully cleared: When you finish the clearing action you can press any button of the copy remote control. If the LED does not flash immediately at this time it will flash after 2 seconds that means Copy the original code of the remote control has been completely cleared if the LED still flashes quickly it means that the code still exists and needs to be cleared again. 3. Restore the cleared code The copy remote control has a recovery function. If you accidentally clear the address code of the normal copy remote control durin