Yahboom ESP32 CAM WiFi Camera Module Kit 2.4GHz with ESP32-S3 Chip Support ROS1 ROS2 APP Control for Microbit DIY Robot

Description The ESP32 CAM module is equipped with an ESP32 S3 chip and a 2MP camera After powering on it automatically releases the WIFI hotspot AP mode and can also be connected to an existing WiFi network STA mode Use your phone to connect to its WiFi hotspot or connect to the same WiFi as it to view the live video stream The module communicates with STM32 AR and other microcontrollers through the serial port Users can install the camera module on the smart car through the bracket PTZ Yahboom will provide remote control APP that supports remote control of smart cars and 2DOF PTZ Parameters ESP32 WIFI Camera Antenna Module 2 4GHz FPC Soft Board AntennaInterface Type Serial PortAntenna Gain 3db gainCase Material ABSOperating Mode Default AP mode STA modeSupply Voltage 5VSupply Current 250mATransmission Distance ≤20mSize 48 32 23 04mmWeight 21gInterface Definition 5V power supply positive TXD serial port transmitterGND power suppy negative RXD serial port receiver 2DOF Electric PTZ Degrees of freedom 2Servo cable length 245mm 5mmFeature It can be installed on the smart car platform with the ESP32 CAM module supporting 2DOF movement in the horizontal and ver tical directions PWM pulse width range 500 2500us correspond 0 180°Servo Model High quality 9G plastic servoWorking Current 80mANo load Speed 0 14sec 60°Stall Current 650mAAngle Accuracy 180° 1°Stall Torque 1 3kgf cmSize 62 36 80 7mmWeight 70gFeatures 1 Basic bracket and 2DOF PTZ ar