XLPower XL70NK01 Protos 700Nitro FBL 6CH 3D Flying Oil Powered Helicopter Kit

Specification Main rotor diameter 1577mm 700mm blades Tail rotor diameter 286mm 105mm tail blades Length without main blade 1392mmOverall height 407mmTail rotor Main rotor ratio 4 766Main pulley 134TAutorotation pulley 143TTail pulley 30TMain Gear ratio 8 21Operate the helicopter in open areas with no people nearby Do NOT operate the helicopter in the following places and situations or else you risk severe accidents in places where children gather or people pass through in residential areas and parks indoors and in limited space in windys weather or when there is rain snow fog or otherprecipitationIf you do not observe these instructions you may be held liable for personal injury or property damageAlways check the R C system prior to operating your helicopter When the R C system batteries get weaker the operational range of the R C system decreasesNote that you may lose control of your model when operating it under such conditionsKeep in mind that other people around you might also be operating a R C model Never useuency which someone else is using at the same timeRadio signals will be mixed and you will lose control of your modelIf the model shows irregular behavior bring the model to a halt immediately and disconnect the batteries Do not operate the model again as long as the problem is not solved as this may lead to further trouble and unforeseen accidentIn order to prevent accidents and personal injury be sure to observe the following Before flying the helicop