Wireless Remote Control Metal Texture to Copy Garage Door Super Strong RF(specification : 433MHZ)

Wireless Remote Control Metal Texture to Copy Garage Door Super Strong RF(specification : 433MHZ)
Uncosinb
sku: 1110825430
ACCORDING TO OUR RECORDS THIS PRODUCT IS NOT AVAILABLE NOW
$8.99
Shipping from: United States
   Description
I. Features: Multi-function multi-variable personalized user-friendly and simple design get started quickly. This smart copy remote control is suitable for electric door remote control retractable door remote control garage door remote control. II. Cloning Chip Types: 2260 (PT2260 SC2260 LX2260 HX2260); 2262 (PT2262 SC2262 LX2262 HS2262 HX2262) PT2264 PT2240 (LX2240) 1527 (EV1527 HS1527 HX1527) FP52626-3AX58AX -4 HT6HT600 HT6180 6 HT6012 HT6013 HT6014 HT12D HT46F49E PIC16F629 PIC16F630 etc. Different chip manufacturers have different prefix chip model numbers as long as the digital part of the chip is the same model number. Note: We generally do not recommend duplicating rolling code chips because there are many uncertainties when duplicating rolling code chips. When copying the rolling code chip remote control it is impossible to determine whether the original remote control chip is an encryption chip. Therefore we do not recommend duplicating rolling code remotes. III. Usage Steps: 1. Clear the code: press and hold the unlock button and the lock button with two fingers at the same time; the LED light flashes 3 times quickly within about 2 seconds; release one finger (the other hand cannot be released) and then use the loose finger to loosen Quickly click the button three times until the LED light flashes rapidly; two fingers can be released; then press any key on the remote control; when the LED light is off it means the code is cleared successfully (all four keys are empty); if you press the remote control After pressing any key of the controller the light is still on indicating that the original code has not been cleared successfully. You need to clear the code again and the clone can be successful only if the code is cleared successfully. You can clean and clone code repeatedly. 2. Copy: hold the original remote control in the left hand and the remote control we cloned in the right hand and keep the two remote controls as close as possible; press the first button of the two remote controls at the same time; after about 2 seconds the LED light flashes twice quickly; After one second the indicator light keeps flashing release your finger; press the key after successful learning and the light is always on indicating that the first key code on the original remote control has been copied to another remote control; the same method can be used to turn on the first key code in turn. The second key the third key... If the copy is successful the remote control function is the same as the original remote control. 3. Recovery: When you accidentally clear the copy of the remote control code you can press the copy of the two keys at the bottom of the remote control at the same time the LED light will flash quickly press any key and release it it will be on for a long time this indicates the remote control code has been restored. Be sure to delete the existing code from the remote before using our clone remote. 4. How to deal with the situation that some keys can be controlled but the other keys cannot be controlled? You can use clear and restore operations as follows: (1) Clear the code first; (2) After clearing the code copy the unsuccessful keys again and the other keys do not need to be copied; (3) Then clear the code again; (4) Recovery code; at this point the original key that was not successfully copied is now overwritten with the new code and the original key that was successfully copied is now preserved. If the key is not copied after the second copy repeat the above steps until all keys are copied successfully. includes: 1 * Remote Control
   Price history chart & currency exchange rate

Customers also viewed