Welding Helmet Solar Powered Auto Darkening Protective Helmet Shield with Variable Shade from DIN9 to DIN13 Suitable for ARC TIG MIG Spot Micro Wire AC DC Plasma Welders/Cutters

Features:
Suitable for ARC, TIG, MIG, Spot, Micro, Wire, AC, DC, and Plasma Welders and Plasma Cutters.
Auto-Darkening Welding Helmets is designed equipped with a special turnover up down headband mechanism. When welder turns over the helmet to welder's head top, the headband mechanism makes helmet's gravity center to be more lower, and be coincided with the center of welder's head. The design of weldine helmet greatly lowers the fatigue of welder's head neck and make welder feel more comfortable than before while at working.
At the moment of starting welding, it automatically changes filter screen from clear to dark in only 1/25,000 sec.
Dark to clear delay adjustment: Operator can vary the time for the filter to return to clear state.
Sensitivity car: be adjustable by turning the sensitivity-setting switch to high(low) position.
At the moment of stopping welding, the filter screen automatically changes from dark to light state according to your set per-delay time. (Turning the time-setting switch to the Short position, then, it can vary at 0.1s~0.3s; Turning the time, setting switch to the long position, then it can vary at 0.6s~0.8s.
The helmet utilizes high performance solar cells as power supply and has 2 built-in 3V lithium batteries as power back-up. No change of battery is required. And the battery life is raised to a new limit. Under normal welding conditions, users can expect a battery has a lifetime of 2 years.
Variable shade(DIN)from DIN9 to DIN 13 is adjusted at the turn of a shade knob(shade variable).
The product is in fully conformity with related DIN, EN safety standards and ANSI Z87.1-1989 standards.
The ultra high performance of UV/IR Auto-Darkening filters provide full protection for the user's eye face against UV/IR radiation during the entire welding process, even in the light state. The UV/IR protection level is up to Shade 16(DIN)at all times. It makes welders feel comfortable in welding wording.
Note:
This auto-darkening welding helmet is not suitable for laser weldingoxyacetylene welding.
Do not protect against severe impact hazards, including grinding disks. Never use for grinding.
Do not protect against explosive devices or corrosive liquids.
Do not immerse the filter in water.
Read the user manual carefully before using, or severe personal injury could occur if the user fails to follow the warnings and the operating instructions.