Watch Waterproof Tester Detector Tool Watch Case Resistant 6 ATM 2 Watches

Description :This watch waterproof tester is used for testing the water resistance of the watch cases. The cylinder is transparent, so it is convenient for you to observe which part of the watch is not waterproof. (You can test two watches at one time.)Specification :Capacity: 2 watchesMaterial: AluminiumMaximum test height: 72 mmMaximum test width: 65 mmExternal Pressure interface: 6 NPressure test range: 0.3 - 6 barCylinder maximum pressure: 10 barCylinder external diameter: 80 mmCylinder inside diameter: 65 mmCylinder height: 140 mmWeight: 3.4 kgDimensions: 240 mm x 145 mm x 275 mmHow to Use the Machine1.Fill the cylinder with water up to the indicated level. It is preferable to use distilled water in order to avoid limy deposit.2.Hang the watch on the hook.3.Replace the lid and screw it tight by means of the 2 nuts4.Using the lever raise the pressure to 3 atmospheres (requirement according to the official standard of the Swiss watch industry), and wait for 3 minutes to allow air to enter the watch5.Immerse the watch and immediately allow the air to escape by pressing the knob While the pressure is falling, observe the watch:if little air bubbles escape from the case, it is obvious that sealing is bad at the point of escape.In this case, lift the watch out of the water.Package includeds :1 x Watch Waterproof TesterDetails pictures :