WUPP S2 Bluetooth Motorcycle Helmet Intercom Headset Wireless Communication, Black, 501 Original

WUPP S2 Bluetooth 5.1 Motorcycle Helmet Intercom Headset IP67 Waterproof Full Duplex Wireless BT Interphone Communication System with FM RadioFeature:1. The product adopts Bluetooth 5.1 chip, which is more power-saving, low-latency, no noise, and realizes stable high-quality audio transmission. The intercom distance can reach 800~1000 meters. Full-duplex intercom Bluetooth headset (can carry out two-way signal at the same time Transmission (AB and BA)).2. The product can be connected to two mobile phones at the same time to realize the control of the basic functions of the mobile phone (receive calls, play music, radio and frequency modulation), and can also be connected with third-party Bluetooth headsets to meet all customer needs.3. The product supports the headset power display for iOS and for some ANDROID systems, and you can check the power anytime, anywhere, at a glance.4. The product design is IP67 high-level waterproof, even if it is used in rain or snow, it will not be affected at all.5. The product adopts super large rotating parts and multi-function buttons, which is convenient and quick to ride and operate, safe and reliable.6. The product adopts CVC8.0 dual-meter noise reduction, DSP software algorithm intelligent quadruple noise reduction, with 2IN1 soft and hard labels and double-mark noise reduction function, the noise reduction effect is more perfect, and high-definition calls can be ensured when using at high speed. The streamlined design of fluid engineering is adopted, which greatly reduces the wind resistance and achieves the coexistence of appearance and strength.7. The product uses 800mAh super-capacity rechargeable polymer lithium battery, which can talk for up to 22 hours and stand by for 400 hours. It can be used and charged during riding, so that both charging and use can be achieved.8. The product is equipped with soft and hard two-in-one earphones, bottom clips, front and back bottom clips, suitable for different types of helmets such as full helmets, half helmets, visor helmets, three-quarter helmets, off-road helmets, retro helmets, etc. A wide range of applications.9. The outer shell of the product is made of high-polished technology, non-rubber oil treatment, internal silicone inlaid structure, so it can be deeply waterproof, light-resistant and durable.10. Support pairing with 99% other brand Bluetooth intercom headsets and ordinary Bluetooth headsets on the market, support K line, connect to ordinary intercom.Specification:Product model: CS-1412D1Product color: Black, Blue, Grey, OrangeProduct material: ABSNet weight: 150gGross weight: 342gProduct size: 7*5*2.5cmProduct packaging: color boxPacking size: 18*14*4.3cmPacking description: white box + EVA lining + color box sleeve packagingBluetooth version: CSR 5.1 Bluetooth chipBattery capacity: 800mAhPlay time: 22 hours or moreStandby time: 400 hoursCharging time: about 2.5 hoursCharging port: USB Type-CBattery type: rechargeable lithium polymer batteryPower requirements: 5V 1A minimum (if lower than 5v1A, the power charging will be slow or even unable to charge)FM support range: 87-108MIntercom distance: 800~1000 metersNumber of intercom: 2 peopleBluetooth intercom mode: two-person modeConnection method: The connection method of two people\\'s Bluetooth headset intercom is series, which can support up to three people to connect, but only two people can talkNoise reduction ability: CVC8.0 automatic noise reductionInstallation method: clip installation, sticker installationWorking temperature: -10℃~+55℃Storage temperature: -20℃~+60℃Installation steps1. Loosen the screws on the back of the fixture with the provided screwdriver2. Open the inner lining of the helmet, insert the clamp into a suitable position on the left side of the helmet and tighten the screw (over tightening the screw will damage the clamp)3. Slide the machine into the clamp, make sure it is firmly locked4. Open the inner lining of the helmet (at the ear position), clean the surface of the EPS, and stick the sticker on the rough surface5. Stick the hook surface on the rough surface of the nylon buckle, and properly arrange the helmet lining6. Insert the earphone plug into the corresponding earphone jack on the machine to complete the installation.(For specific details, please refer to the helmet headset installation video. If there are special circumstances, please do not force the installation, and contact the corresponding customer service as soon as possible.)Language operation steps:1. Switch on and offPower on: In the power off state, press and hold the power button for 2 seconds. After hearing the \\\"power on\\\" prompt, the current battery level of the Bluetooth host will be automatically broadcast, and the Bluetooth indicator will be on for 2 seconds.Shutdown: In the power-on state, press and hold the power button for 5 seconds after hearing the \\\"shutdown\\\" prompt, the red indicator light will be on for 2 seconds2. Mobile phone pairing: When pairing with a mobile phone, make sure that the mobile phone and the Bluetooth headset are within a visible range of 1 meter. The three operations are as follows:Press and hold the power button for 5 seconds to see the red and blue lights flashing alternately and hear the \\\"pairing mode\\\" prompt;Actively disconnect the Bluetooth headset on the mobile phone, see the red and blue lights flashing alternately and hear the \\\"pairing mode\\\" prompt;Press and hold the multi-function button for 5 seconds in the power-on state, see the red and blue lights flashing alternately and hear the \\\"pairing mode\\\" prompt;3. Intercom pairing:Confirm that both S2s are turned on and placed within a visible range of 1 meter;Turn on the two S2s, press and hold the intercom button for any one of them for 5 seconds, see the blue light flash quickly and hear the \\\"intercom pairing mode\\\" prompt;On the other one, press and hold the multi-function button for 5 seconds, see the red and blue lights flashing and hear the \\\"pairing mode\\\" prompt;4. Bluetooth intercom: Prompt \\\"open intercom mode or close intercom mode\\\" (graphic presentation is best)5. Answer the callAnswer the incoming call: In the incoming call state, short press the multi-function key onceAutomatically answer the incoming call: In the incoming call state, the call will be answered automatically after 10 seconds without operationReject the incoming call: In the incoming call state, long press the multi-function button for 2 secondsSwitch the headset to the mobile phone: in the call state, long press the multi-function button for 2 secondsTerminate the call: In the call state, short press the multi-function button onceVoice assistant: When connected, press and hold the multi-function button for about 2 seconds to let go (this function requires the phone to support voice dialing. For details, follow the instructions of the phone manual) to prompt \\\"Voice Call\\\"Last code redial: In the connected state, double-click the multi-function button. Prompt \\\"last code redial\\\"6. VolumeVolume increase: In FM mode and music mode, turn the knob clockwise 1 time. The maximum volume prompts \\\"drops\\\";Volume reduction: In FM mode and music mode, turn the knob 1 time counterclockwise. The minimum volume prompts \\\"beep\\\";Multi-language conversion: In pairing mode, double-click the FM and intercom buttons at the same time;Restore factory settings: In pairing mode, long press the intercom button and multi-function button for 5 seconds to clear the pairing information.7. FM functionTurn on FM: In the power-on state, press and hold the FM button for 2 seconds. Prompt \\\"FM Mode\\\"Turn off FM: In the power-on state, long press the FM button for 2 seconds. Prompt \\\"Bluetooth Mode\\\"Previous: In the power-on state, turn the knob counterclockwise for 2 seconds to releaseNext: In the power-on state, turn the knob clockwise for 2 seconds to release8. MusicMusic play/pause: In the state of playing music, short press the multi-function button, repeat the operation to pauseNext song: When playing music, turn the knob clockwise for 2 seconds to releasePrevious song: When playing music, turn the knob counterclockwise for 2 seconds to releaseTwo S2 connections:Step 1: Make sure that both S2s are turned on and placed within a visible range of 1 meterStep 2: Turn on the two S2s. After turning on the headset, double-click the intercom button on any headset and hear the \\\"Enable Intercom\\\" prompt, then short press the multi-function button and hear the \\\"Initiate Intercom\\\" prompt. If the intercom connection is successful, you will hear the \\\"Intercom is connected\\\" prompt. If there is no connection within one minute, there will be a \\\"connection timeout\\\" prompt (the \\\"beep\\\" prompt will be displayed every 15 seconds during the connection process)Function priority:Level 1: Intercom connected by phone or adapterLevel 2: Intercom connected to the intercom control lineLevel 3: Bluetooth intercomLevel 4: FM or musicBluetooth status indication and prompt:Power-on state (when Bluetooth is connected, you hear \\\"Bluetooth connected\\\", and the Bluetooth indicator flashes once every 12 seconds; when Bluetooth is disconnected, you hear \\\"Bluetooth disconnected\\\" and the blue indicator flashes twice every 12 seconds) .Low battery alarm (in the power-on state, it will prompt \\\"The battery is low, please charge\\\" every 60 seconds, and the indicator light will flash in red).Charging status (red light is on when charging, red light is off when charging is completed, blue light is always on. Off in 10 seconds).The power-on battery voice prompts from 100% battery to 10% battery, please charge.Tip:The applicable storage temperature of this product is -20℃ to 60℃, please do not store in an environment with too high or too low temperature, otherwise it will affect the service life of the product.If you do not use this product for a long time, please keep it in a dry place, and charge the product regularly (once every three months) to ensure that the product can work normally.The actual time may be different under different mobile phone types or different usage conditions.There will be some deviations in the working distance due to the influence of the environment and climate.Note:There may be slight size deviations due to manual measurement, different measuring methods and tools.The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.Package Content:1 X Intercom1 Pair X Stereo Soft And Hard Headset2 X Headset Fixing Tapes2 X Spare Headset Fixing Tapes1 X Screw Clamp2 X Spare Screws1 X Screwdriver1 X Clip1 X USB Data Cable1 X Manual