WECAM PoE Cable - Power Over Ethernet Injector / Splitter Kit RJ45 DC Power Gaming Adapter(White, For PC)

Passive PoE Injector/Splitter DC Connector Cable . The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. . Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) . How to Use:. 1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket. . 2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end. . 3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them. . Input / Output Specifications . DC Input Voltage:UP to 60V DC . DC Output Voltage:UP to 60V DC . Max Output Current 1.5A-2A . Max. Over Current Protection None . Work range: Below 30 meters. . General Specifications: . Operating Temperature -40°C ~ 60°C (-40°F ~ 140°F) . Color: Black . Material: PVC . Ethernet Data Rate 10/100Mbps . Ethernet Cable TIA/EIA 568 Cat.5 . Humidity Up to 90% . DC Plugs 2.1mmx5.5mmx12mm . Length 20cm Approx . Package Includes: PoE Splitter x1 PoE Injector x1