Voltage Current Meter Multi-Function Electronic Current Measuring Tool Clamp Meter For Measure Voltage For Current For Frequency Rate

Voltage Current Meter Multi-Function Electronic Current Measuring Tool Clamp Meter for Measure Voltage for Current for Frequency Rate Specification: Item Type: Clamp Meter Model: CM-2016 Material: ABS Power supply: 2 x 1.5V AAA Battery Not Included Purpose: Electricity test Basic Function Range Basic Accuracy DC Voltage 600mV/6V/60V/600V ±0.5%+5 AC Voltage 6V/60V/600V ±0.8%+5 DC Current 60A/600A/800A ±1.5%+5 AC Current 60A/600A/800A ±1.5%+5 Electric Resistance 600 Ohm /6k Ohm /60k Ohm /600k Ohm /6 milliohm /60 milliohm ±0.8%+1 Electric Capacity 6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF ±2.5%+5 Frequency Rate 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz ±0.5%+4 Temperature -40 degrees Celsius ~1000 degrees Celsius /0℉~1832℉ ±1.0%+5 Special Function CM-2016 NCV √ True RMS Measurement √ Diode Test √ On-Off Alarm Lower than 50 Ohm when higher than 600 Ohm OL will be displayed Low Voltage Display Approximately less than 2.4 V Data Retention √ Automatic Shut-Down About 15 minutes Duty Cycle Measurement √ Functional Protection √ Clamp Head Lighting/Backlight Function √ Input Resistance 10 milliohm Sampling Frequency 3 times/sec AC Frequency Response Current 40-1000 Hz/Voltage 40-2000 Hz Operation Method Manual or automatic range Maximum Display 6000 Open Jaws 28mm Power Supply 2 x 1.5V AAA Battery Not Included Power Consumption Quiescent current about 2mA Package List: 1 x Clamp Meter Battery Not Included 2 x Test 1 x Thermal Contact 1 x Tool Bag