Viscolam AT 100 P / 500 gr

Netto 500 gr
VISCOLAM AT 100P
VISCOLAM AT 100P is a ready-to-use liquid polymer based on the "Hydro Swelling Droplets" concept.
When added to polar systems it hydrates and swells instantly without the necessity to heat or modify the
pH. VISCOLAM AT 100P is unpreserved as supplied and is acrylamide free.
1. PRODUCT IDENTIFICATION
Chemical description : emulsion of sodium polyacryloyldimethyl taurate
INCI name : Sodium Polyacryloyldimethyl Taurate, Hydrogenated
Polydecene, Trideceth-10
CTFA name : Sodium Polyacryloyldimethyl Taurate (and) Hydrogenated
Polydecene (and) Trideceth-10
2. GENERAL CHARACTERISTICS
Appearance at 25C : viscous emulsion
Odour : from odourless to slightly aliphatic
Bulk Viscosity (Brookfield RVT) : max 6000 cps
Viscosity 2% w/w water sol. (Brookfield RVT) : 45000 65000 cps
Solid content % : 36.0 - 42.0
pH (2 % solution) : 6.0 - 8.0
Total Viable Count, CFU/g : max 100
3. USE and APPLICATION
VISCOLAM AT 100P is a ready-to-use polymeric thickener/stabilizer for cosmetic emulsions.
It is suggested to add the product under stirring, after the mixing of the water and oil phase. Nevertheless the product can also be added at any step of the formulation both in cold or hot process. It can be used under neutral as well as acidic conditions.
Average use level is 2% as supplied, it can be used at lower levels (0.5 0.8%) as a co-emulsifier.
VISCOLAM AT 100P can be used in leave-on products: creams, lotions, milks, sunscreens. It can thicken fatty
phase-based products, it stabilizes high amount of fatty phases and has a very high compatibility with silicones. It
works also as a co-emulsifier and works even at low pH (3.0 3.5). It can be used in cold or hot processes.
VISCOLAM AT 100P shows compatibility with DHA for formulating sunless tanning products and can be used to stabilize and suspend inorganic UV filters, such as Titanium Dioxide, in sun care emulsions.