VT5804 V3 5.8G 16CH 25/200/400/800/1000mW FPV Transmitter Support OSD for FPV Racing Drone

VT5804 V3 5.8G 16CH 25/200/400/800/1000mW FPV Transmitter Support OSD for FPV Racing Drone VT5804_V3 is a 5.8G ISM band analog video transmitter. It has large output power, stable output power, long transmission distance and strong power supply performance. It can ensure that the image has no snowflake and no horizontal stripes under the maximum throttle. Not only that, the V3 transmitter also has remote control OSD interface remote frequency point control, does not interfere with the companion at the moment of booting, and supports the super function of 8 people flying at the same time. And streamline the number of cumbersome channels to 16 common channels (including all R and A channels) Description: Item number: VT5804 V3 Item name: FPV Transmitter Features: * Large output power, stable output power, long transmission distance: unobstructed stable transmission distance 10km; * Transmit power switching: 25mW/200mW/400mW/800mW/1000mW; * Output 16 frequency points, including commonly used R group and A group, the frequency setting is no longer cumbersome; * Frequency lock is fast, and the boot does not interfere with the companion; * Self-contained output power self-test function; * Full-format video format: NTSC / PAL; * Wide input voltage range, low power consumption: 7V ~ 28V, +12V / 450mA @ 1000mW; * Full metal CNC casing, dustproof and explosion resistant; * Small size: 36mm 36mm 8mm, mounting hole 4-M3; * Light weight: 15g (without antenna); Modulate Wideband FM Modulate Video Formant NTSC/PAL Characteristics Value Units Min. Typ. Max. Output Impedance -- 50 -- Ohm Output Power(max.) 29.5 30 30.5 dBm VCC-IN 7.0 12 28 V Supply current @12V@1000mW 400 450 500 mA Video Bandwidth 0 -- 8 MHz Video Input Level 0.8 1.0 1.2 Vp-p Weight -- 15 -- g Antenna Connector mmcx Dimensions(L*W*H) 36mm*36mm*8mm Frequency and power control methods: 1, BF firmware; 2. Short press once to change the number of channels (CH1-CH16); 3. Press and hold the button for 3 seconds and then press the button to change the power level: 25mW/200mW/400mW/800mW/1000mW; Caution: * Make sure the antenna is installed at the output before powering up to avoid damage to internal components; * Note that the input voltage is within the specified range and is correct to avoid damage to internal components; * If you replace the antenna, please select the standing wave and the gain antenna to obtain a longer transmission distance; * Pay attention to static electricity during transportation and installation; Package Included: 1x VT5804 V3 FPV Transmitter