Upgraded 10A 12V/24V Auto Volt/Amp/Temp Display PWM Solar Panel Charge Controller Support Vpmax Detection

Features: - With Voltage & Current & Temperature Display - Support detection for the Vpmax for the panel, Not just charging voltage. - 32 bit MCU high-speed kernel ARM CORTEX, CPU running speed 72MHz - 13 new function LCD menu, Adjustable charging parameters. - One-click to restore factory Settings, One-click to reboot. - Fully 3-stage PWM charge management. - Build-in short-circuit protection,open-circuit protection,reverse protection, Over-the-load protection. - ST/IR/ Infineon imported dual MOS MOSFET for anti-reverse circuit - 1oZ copper foil thickness, applicable in -35~60 high-temperature protection. - Use 1% high precision resistance, the high-temperature solid-state capacitor on the PCB board with thickness over 2mm. - Ultra-low power consumption 12mA@12V. Specification of 20A Controller: Rated Voltage:12/24V Auto-Adaptive Rated Current: 20A Applicable Pmax & Voc in 12V Solar System: 260W, 15-25V Applicable Pmax & Voc in 24V Solar System: 520W, 30-50V Equalization: 14.4V Float charge: 13.7V (defaul,adjustable) Discharge stop: 10.7V(defaul,adjustable) Discharge reconnect: 12.6V(defaul,adjustable) Charge reconnect: 13V Voltage of open light: Solar panel 8V(Light lights delay) Voltage of close light: Solar panel 8V(Light off delay) USB output: 2 way USB output,5V/2A(Max.) Self-consume: 1A). About the Temperature Display Charging will stop at >80 Charging will restart at