Universal Car Tail Pipe Muffler Outlet Exhaust Automobile Rear Tube Nozzle, Silver, 501 Original

Universal Car Tail Pipe Muffler Outlet Exhaust Automobile Rear Tube Tip Nozzle Double Refit End Trim Replacement AccessoryFeature:Three stainless steel screws in different directions are fixed to ensure firm combination with the vehicle;The rear sealing design can prevent the heat of tail gas from flowing back and baking the bumper;Deep crimping, precise fitting, no cutting, universal installation of tail throat;The unique drainage hole design can quickly discharge accumulated water and effectively prevent the exhaust pipe from rusting;The unique oblique mouth design gives your car another style.The universal tail pipe is suitable for most models of exhaust pipes on the market. It can be selected according to the exhaust pipe of the vehicle. If the exhaust pipe is straight, it can be selected from the straight type, and if it is curved, it can be selected from the curved type.Installation method: screw connection is adopted. Loosen the screws on the tailpipe, sleeve the tailpipe at the appropriate position at the tail of the automobile exhaust pipe, and then tighten the screws with a wrench. Do it yourself in 5 minutes!Specification:Model: one outlet and two square outletColor: Silver / Grilled BlueMaterial: stainless steelInner diameter of tail throat interface: 63m/24.8inTips:1. The distance between the tail throat and the bumper shall be more than 2cm to prevent the bumper from being scalded by the high temperature of tail gas;2. Please wear gloves during installation in case of minor injury;3. Please do not install this product when the car has just stopped or started to avoid being scalded by the exhaust pipe.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1 x Tail Pipe Muffler