Uncut Ignition 4C Chip Car Key Blank Transponder Replacement for Ford Mercury

Uncut Ignition 4C Chip Car Key Blank Transponder Replacement for Ford Mercury Feature: 1.It is durable and convenient. 2.Simple design and easy to use. 3.Will has a mark in the key. Specification: Color:Black Size(appeox.):76mm/2.99"(L) (Detail size as shown in the picture) Material:Plastic and aluminum alloy Chip:4C Manufacturer Part Number:for H72-PT, 598333, 011-R0221, 4C Chip Interchange Part Number:for H72-PT, 598333, 011-R0221, 4C Chip Other Part Number:for H72-PT, 598333, 011-R0221, 4C Chip Fitment: For 2000-2005 Ford Excursion 1996-2005 Ford Mustang 2004 Ford F-150 Heritage 1999-2004 Ford F-250 Super Duty 1999-2004 Ford F-350 Super Duty 1999-2004 Ford F-450 Super Duty 1999-2004 Ford F-550 Super Duty 1998-2002 Ford Crown Victoria 1999-2000 Ford Ranger 1999-2000 Ford Windstar 1998-1999 Ford Explorer 1996-1999 Ford Taurus 2002 Lincoln Blackwood 1998-2002 Lincoln Continental 1998-2002 Lincoln Navigator 1998-2002 Lincoln Town Car 1998-2002 Mercury Grand Marquis 1997-2000 Mercury Mountaineer How to programmable: These are self-programmable, however you will need 2 working keys in order to use that procedure. With 1 or less working keys, you will need a local dealership or automotive locksmith to program these for you. Here are the programming instructions: You Must have Two Working Keys (keys that start your car) to perform this procedure. Please note that cloned keys will often not work properly for this procedure. If you only have one working key or none at all it must be programmed by a dealer or locksmith. Your new third (unprogrammed) key must also be cut prior to performing this procedure. Hardware stores and places like Wal-Mart cannot program these. 1. Insert an existing (working) key into the ignition cylinder. 2. Turn the ignition cylinder ON (just shy of starting the car Without cranking the engine) and back to OFF. Ignition should stay in ON position for at least one second. 3. Remove the existing key and WITHIN TEN SECONDS, insert a second working key and turn to ON and then back to OFF. Ignition must be on for at least one second but no more than ten seconds. Remove key. 4. Insert the New (unprogrammed) key before twenty seconds have elapsed and turn to ON. Leave it in the ON position for at least one second and turn back to OFF. 5.The security light will light up for THREE seconds to indicate the new key has been successfully programmed. Package Included: 1 x Uncut Car Key