Ubertooth 1 module test tool 2.4GHz wireless development analysis open source

Specification: Ubertooth 1 is an open source 2.4 GHz wireless development platform for Blue tooth experimentation. Based on the powerful LPC175x microcontroller and full-speed USB 2.0 the Ubertooth 1 is a great way to develop a custom comparable Class 1 Blue tooth device. The entire board is only **** two and a half inches long with a connector on 1 end and an RP-SMA connector on the other. What sets Ubertooth apart from other Blue tooth development platforms is that it is not only capable of sending and receiving 2.4 GHz signals but it can also run in monitor mode to monitor Blue tooth traffic in real time. This mode of operation has been present in low-cost WiFi modules for years and has seen countless applications in research development and security audits but so far the Blue tooth standard has had no such solution. Plus since it s a completely open source platform (software and hardware) the schematics and are available for all your hacking needs. feature: 2.4 GHz transmit and receive. Transmit power and receive sensitivity are comparable to Class 1 Blue tooth devices. Standard Cortex debug connector (10-pin 50-mil JTAG) In-system programming (ISP) serial connector The extension connector is designed for communication between Ubertooth or other future uses. Six LED indicators Contains 2.4 GHz duck antenna Note: To open the schematic and board layout files in the source package you need to download KiCad an open source electronic design automation software package. Dimensions: 61.75 mm x 19 mm (2.43 in x 0.75 in) Package includes: 1*motherboard+1*antenna Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.