USB3.1 To M.2 SATA SSD Clone Docking Station External Hard Drive Enclosure

1. Connect PC to transfer data, disconnect PC to clone offline2. Supported device: M.2 SATA SSD (M.2 nvme SSD is not supported)3. The built-in silent high-speed fan can quickly dissipate heat for the IC PCBA, the product performance is stable, and the hard disk is better protected.4. Support most M.2 SATA NGFF B+M key SSD (2230/2242/2260/2280/22110 MM).5. Achieve 6Gbps data transfer from M.2 SATA SSD to host PC.6. Plug and play, no driver required.7. Support up to 6TB hard disk, read two hard disks at the same time, support Windows, Mac OS, Linux.8. Offline clone and docking, no need to connect to the computer; long press the clone button for 5 seconds + short press the clone button for 1 second. When the 25% indicator flashes to the 100% indicator, it means completion (please note that the capacity of the target SSD must be greater than or equal to the original SSD!)parameter:1. Interface: Type C2. Transmission speed: 6Gbps speed3. Power supply: DC 5V 3A4. Product material: ABS5. Matching cable: Type C To Type C, Type C To USB3.0, cable length 35 cm