UNI-T Function/Arbitrary Waveform Generator 30MHz DDS Dual Channel Signal Generator Counter 200MSa/s Frequency Meter Sine Square Wave Generator for Laboratory Electronic Equipment Test

Features:
Two equivalent-performance channels. Output frequency range: 1μHz-30MHz. Parameters can be repectively set on each channel.
Multiple output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary.
Use direct digital synthesis (DDS) method, sampling rate of 200MSa/s and vertical resolution 14 bits to produce accurate and stable waveforms.
Use 7-digits high accuracy and broad-band frequency counter that compatible with TTL level signal. Support frequency scanning and output, low jitter square wave output.
Supports the storage of 24 groups non-volatile arbitrary waveform.
Simple and useful modulation types: AM, FM, PM, FSK.
4.3 inches TFT LCD and standard configuration USB interface.
Note:
Do not expose the product to direct sunlight for a long time.
Do not place it in mist, liquid or solvent.
Parameters:
Channel: 2
Max frequency: 30MHz
Sampling rate: 200MS/s
Vertical resolution: 14 bits
Waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary
Sweep modes: Logarithmic, linear
Frequency Characteristics
Sine: 1μHz~30MHz
Square: 1μHz~15MHz
Ramp；1μHz~400kHz
Pulse：1μHz~15MHz
Arbitrary：1μHz~10MHz
Resolution：1μHz
Accuracy：Within 90 days 50ppm, Within 1 year 100ppm, 18℃~28℃
Output Characteristics
Impedance: 50Ω/High Z
Amplitude range: 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z)
DC offset range (AC+DC): 5V (50Ω); 10V (high Z)
Amplitude resolution: 1mV