Two Trees SK1 3D Printer 700mm/s High-Speed Printing Compatible with Klipper Firmware Wifi Remote Control Support Z-Tilt Auto-leveling

Features:
700mm/s Boost in Speed - SK1 3D printing machine compatible with Klipper firmware and high-performance processor so that it has the ability to reach a printing speed of 700mm/s and 20000mm/s² acceleration. Users can produce creations faster than ever before.
Reliable Printing Quality - XYZ-axes Linear motion guide design and ball bearing guide rail allow SK1 works more stable and precise to print. Along with support automatic calibration, you can get both high-speed printing and fine quality at the same time. 254x254x254mm/10x10x10inches build volume.
New Auto-leveling Method - Using 3 independent motors control the 3 Z-axes respectively to truly level the heated bed, with compensation for the 36 point bed mesh, PEI uneven because to the minute inaccuracy. And comes with double-sided printing platform of SK1 3D printer - PEI + PEY, can directly take off the mold without bending or cooling.
300C High-temp Nozzle - With a high-temp nozzle and an all metal hot end, only takes 30 seconds to heat to 300℃, SK1 3D printer can handle a wider range of materials such as PLA /PETG/PC/ABS /TPU /Nylon etc.
Direct Drive Extruder - Upgraded dual-gear direct drive extruder has a 9.5:1 transmission ratio, greater tension, providing powerful extrusion and 32mm³/s large flow rate.