Turbosound Milan M15 1100W Powered 15" Loudspeaker w/Klark Teknik Technology

The Turbosound M15 1100W Powered 15" Loudspeaker with Klark Teknik Technology is a portable two-way loudspeaker featuring two independent input channels, mic and line inputs, two band EQ, intelligent limiting and a Mix Out function for connection to additional loudspeakers for easy system expansion. The Class-D amplifier is a two channel unit with an integrated electronic crossover, allowing the HF and LF drivers to be powered separately without one being able to influence the sound of the other. Total output power is 10000 watts peak, providing plenty of headroom to maintain good dynamic range so that transient signals are delivered effortlessly. The lightweight switch-mode power supply couples with industry leading Klark Teknik digital signal processing, providing dynamic equalization and sophisticated limiting functions to ensure optimum performance and long term reliability.The two discrete input channels are each equipped with balanced combination jack/XLR connectors and a level control, catering for a range of music sources from low impedance microphones, acoustic guitars and keyboards, to mp3 players and mixing consoles, selectable via a mic/line slide switch. Common to both channels are bass and treble controls with +/-6dB of cut or boost to allow the loudspeaker to be equalized to the venue. In addition, a low cut filter is provided at 100Hz to shelve the low frequency response when used on the floor as a wedge monitor or to ensure correct integration with subwoofers. A speech/music switch optimizes the loudspeaker's frequency response either for predominantly vocal material or for music programme. A Mix Out function sends the mix of both input channels post-EQ to additional loudspeakers on a balanced male XLR for easy system expansion. The trapezoidal enclosure is fabricated from high density polypropylene and is extensively ribbed externally and internally to eliminate resonances and also to provide an attractive and durable cabinet finish. The symmetrical side angles allow the loudspeaker to be conveniently used as a floor monitor. The recessed grab handle on the top is designed for easy lifting and carrying, while the dual angle pole mount socket allows the loudspeaker to be mounted on straight poles or speaker stands either vertically or raise higher and angled down to optimize audience coverage. A total of six M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or horizontal suspension in permanent installations using M10 shoulder eyebolts. Mains power is connected via a non-locking IEC receptacle with integrated fuse holder. The illuminated front badge can operate in one of three possible modes: permanently on; permanently off; or to indicate the action of limiting.The M15 loudspeaker can be wall mounted using the PB-55 universal wall bracket with the built in pole mount socket. It can also be suspended in permanent installations using shoulder eyebolts attached to the M10 rigging points provided on the top and bottom of the cabinet. The loudspeaker can be oriented either vertically or horizontally to suit the available venue space.