Tilta ES-T15-B Lightweight Rig for Sony FS7, Kit 3

The Tilta ES-T15-B Rig is a very stylish and lightweight rigging system for Sony FS7. It includes an FS7 specific VCT compatible baseplate with 15mm clamps on the front and back. ARRI rosettes are found at the front on either side for mounting compatible handles. It is made of anodized aluminium. - 19mm Baseplate / ARRI Standard Dovetail - You can easily mount your cinema camera on the iKan (Tilta) 19mm Baseplate / ARRI Standard Dovetail Plate to create your own camera support system. The ARRI standard dovetail plate can be used directly on the OConnor 2060, 2575 and 120ex and Sachtler Cine 30 fluid heads. - 4x5.7" Carbon Fiber Matte Box - The Tilta 4 x 5.7" Carbon Fiber Matte Box easily mounts onto 19mm rails via its 19mm rod adapter. It features two 360deg. rotating filter holders of 4 x 5.65". The lightweight carbon fiber construction adds very little weight to your system and the swing away design allows you to make quick lens changes and simply move the matte box away from your lens when you're not using it without having to detach it from your system.The matte box also comes 80, 90, 114 and 134mm lens adapters to fit most telephoto lenses and three flags to reduce side flare. - Tilta III FF-T05 Single Sided Cinema Follow Focus - This single-sided follow focus has a 1:1 hand wheel-to-gear ratio for extremely accurate focus pulls. It attaches to both 15mm LWS and 19mm rod supports by snapping onto the rods. This allows you to adjust, mount and remove it without the need to remove other accessories that are also mounted onto the rods (such as matte boxes and lens supports). The gear is attached to a swivel that allows you to rotate it against the lens for a tight fit. You can also slide the whole unit from side-to-side, allowing you to easily adjust to fit any size of lens.