Thread Repair Tool Thread Drill Taps Rethread Set Car Repair Tools 131pcs Damaged Thread Restoring Kit M5 M6 M8 M10 M12 Wire Thread Inserts Professional Car Repair Tools

thread repair tool thread drill taps rethread set car repair tools 131pcs Damaged Thread Restoring Kit M5 M6 M8 M10 M12 Wire Thread Inserts Professional Car Repair Tools Specification: Condition: Item Type: Thread Repair Tool Material: Steel Set Includes the Following: 5 x installation tools 5 x break pin tools 5 x drills 1 x hex key 5 x taps 110pcs wire thread inserts M5 x 0.8 M6 x 1.0 M8 x 1.25 M10 x 1.5 M12 x 1.75 Application: 1. Drilling - clear the damaged threads with a standard drill. to repair a thread no pre-drilling is necessary if using the special tap please pay attention that for fluteless taps bigger holes are required. 2. Check - check that the thread and pitch of the tap and the match. 3. Tapping - use the special taps for cutting the holding thread into the cleared hole recommended to use a suitable cutting oil 4. Install the insert - place insert on installation tool and position the so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the . 5. Don t work against the thread direction as the tang could break. 6. Tang removal - After finishing lift the installation tool and use the tang break tool to remove the tang. For bigger sizes and taps use long nose to remove the tang. Due to the narrow and exact tolerances the new thread normally is than the original ones. Package List: 110 x Wire Thread Insert 5 x Installation Tool 5 x Broken Pin Tool 5 x Drills 1 x Hex Wrench 5 x Taps 1 x Manual 1 x Tool Box