Tesla Coil DRSSTC SKP Jump Pulse Driver Module Board New Arc Extinguishing Controller

Driver Dual GDT output support for driving IGBT modulesCurrent feedback threshold setting support DRSSTC and SKP modeThe latest development of firmware support for a variety of fiber heads using a modulated signal New DRSSTC SKP dual mode Tesla coil arc extinguishing controller Switchable SKP DR pulse control mode maximum On Time up to 10ms in SKP modeSupport for One Shot button one shot functionSupport for audio external trigger inputSupports 2 5 batteries and external 12V DC power supplyArc extinguisher panel description 1 The power input is 12V inside and outside negative and the internal battery is AA No 5 battery 2 Audio input is only allowed in DR mode 3 The fiber specification is SPDIF fiber 4 Trigger mode switch The AUTO file automatically sends the trigger pulse continuously and the AUDIO file is triggered by the audio or it is triggered once when the trigger button is pressed 5 Trigger button In Audio mode an arc extinguishing pulse is triggered when the trigger button is pressed 6 Arcing pulse width knob adjust the pulse width of the Ontime signal 7 Frequency knob In Auto mode the arc extinguishing pulse frequency knob is used to adjust the Ontime pulse frequency 8 Arc extinguishing mode switch The SKP output pulse width is wider than the DR mode and the output frequency is lower than the DR mode under the AUTO trigger 9 Power switch Turn to the ON arc extinguisher to start turn to the OFF arc extinguisher to stop working The arc