Teradek OMOD|AKS DSMC2 Cage Kit 2.0

The OFFHOLLYWOOD OMOD Top Plates extend low profile DSMC2 Top Plate design to cover an attached OMOD Module.The plate mates via 1/4-20 screws into both the DSMC2 camera brain and the OMOD Module.
Pogo pins allow run / stop trigger from DSMC2 handles that feature integrated record start/stop buttons and allow handles to be reversed and extend in the direction of the lens.Attach the RED 7" Touchscreen or LEMO Adapter on top or side of the DSMC2 camera without interference with the plate.
-- OMOD|AKS DSMC2 Riser Plate --
The OFFHOLLYWOOD DSMC2 Riser Plate shims your DSMC2 camera up to standard accessory height using the original RED, Wooden Camera, Element Technica and OFFHOLLYWOOD BP19.Features• Compatible with both the Element Technica's Universal 15mm Lightweight Rod Bracket and the Wooden Camera LW 15mm Bracket for adding light weight rods at industry standard height• 1/4-20 holes for attaching cage components and accessories• 1/4-20 hole alignment matches all OFFHOLLYWOOD Top Plates and Side Arms• Includes (2) low profile 3/8-16" captive screws-- OMOD|AKS DSMC2 Wide Side Arm --
Use OFFHOLLYWOOD DSMC2 SIDE ARMS to make a cage with Teradek's Riser and Top Plate options.
Teradek's most popular arm clears the SSD Module on the Operator side of the camera and features (2) angles 3/8-16 holes in addition to (5) ARRI patterned 3/8-16 holes and (8) 1/4-20 holes. Can be used on both sides of the camera.

OFFHOLLYWOOD DSMC2 Side Arms come with (2) captive 1/4-20's for mating with our DSMC2 Riser Plate and DSMC2 Top Plate - Standard or OMOD Top Plates.-- OMOD|AKS DSMC2 Low Profile Side Arm --OMOD Low Profile arm is designed specifically for using an OMOD with your DSMC2 camera. Ultra-low profile that mounts in the space typically taken by RED's Base Expanders connectors - features (4) ARRI patterned 3/8-16 holes and (6) 1/4-20 holes-- OMOD|AKS DSMC2 Side Plate --
This bracket attaches to any top plate or riser with 9mm spaced 1/4-20's. It features two captive 1/4-20 screws and have 1 x 3/8-16 tapped hole with ARRI pattern and 9 x 1/4-20 tapped holes with 9mm spacing. This plate can also be used to screw down horizontally onto a top plate or cheeseplate to add a 3/8-16mm tapped hole with ARRI pattern.