TRENDnet VDV & USB Cable Tester
TRENDnet's VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video and USB cables. The TC-NT3 identifies proper, severed, short circuit and cross connected pins for cable distances of up to 300 meters (1000'). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6 and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0 and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port's LED indicator to blink Cable Distance Tests cables lengths of up to 300m (1000') Tone Generator Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones.