TKS-M8 4-40V DC Motor Speed Forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming

Specifications Working voltage 4 40V DCModule power consumption 0 6W static 0 1W Signal input active low The input is the negative of the optocoupler A signal is considered to be present when the voltage is below 2V Response speed K1 K2 is 20mS SW1 SW2 is 50mS Output current 20APCB size 83 46 20mmShell size 87 54 59mm User Manual K1 Forward signalK2 Reverse signalSW1 Forward limitSW2 Reverse limit1 Press K1 and the motor will start to rotate immediately until SW1 closes 2 Press K2 and the motor immediately starts to reverse until SW2 closes and stops 3 When K2 is pressed during forward rotation it will switch to reverse immediately When K1 is pressed during reverse rotation it will switch to forward rotation immediately 1 What mode is P0 P0 is self locking mode For example if the external forward switch K1 is pressed the motor will immediately rotate forward At this time the instant switch will be released and the motor will continue to rotate forward It will not stop until the reverse signal K2 or the forward stop signal SW1 is encountered 2 What are the requirements for the signal can I connect the sensor The signal is active low and can be a three wire sensor NPN NO type K1 K2 SW1 SW2 is still the specification 3 What is the input and output voltage The input voltage range of the TKS M8 is 4V 40V but to ensure reliable operation it is recommended to use it within the range of 6V 36V This module is wide voltage The output motor