T100 Aluminum Alloy Chassis Tank Car Smart Robot DIY Kit

There are six kinds for your choice: A: Gold Chassis B: Gold Chassis + Espduino kit C: Gold Chassis + NodeMcu Lua kit D: Silver Chassis E: Silver Chassis + Espduino kit F: Silver Chassis + NodeMcu Lua kit Introductions: A novel design with beautiful shape and full metal aluminum alloy structure. In this tank chassis, a space for 9g servo is left for the ultrasonic sensor, and a space for MG995 servo is also left to rotate the mechanical manipulator. What is more, UNO R3 and NodeMCU development boards are also designed to install. In addition, the metal panel can be used to install the wheeled car by install the 25mm or 37mm motor frames. With small LED light, brighten the dark in the night. Features: 1. Reserve the space for 9g, MM95, MM96R gear; 2. Reserve for the installation holes for UNO R3 and NodeMCU development board kit; 3. Reserve the space for robotic manipulator; 4. Design the LED light for the dark moving and brighten the light; 5. Add the 25mm and 37mm motor frame, can change the 4WD smart car 6. with Hall sensor and feedback 7. The metal chassis is generated by aluminum alloy; 8. The bearing wheels and the driving wheels are metal 9. The bearing wheel piece is connected by the stainless steel and two bearings, which can let the bearing wheel is rotate freely with small frictions 10. The chassis can bearing the weight is about below 5kg; we test the 2.3kg 11. All the chassis are metal, excluding the track (plastic) Specification: Type: T100 smart robot car Color: golden yellow silver. Chassis Material: aluminum alloy Wheel: metal Track: plastic Product size: about 200*190*80mm (length * width * height) Motor Parameters: Name: 25mm gear motor Output speed: 15010%rpm No_load current: 200mA (Max) Stall current: 4500mA(max) Stall torque: 9.5kgNaN Rated speed: 10010%rpm Rated torque: 3000gNaN Rated current: 1200mA (Max) Noise: 56dB Working voltage: 9V Outside Shaft Length: 14.5mm Shaft End Play: 0.05-0.50mm Screw Size: M3.0 Diameter. Of Shaft phi 4mm, D3.5 Encoder: 2pulses/circle Working voltage for sensor: 3-5V Note: Track can be connected by any length with a needle. Package included: 1 x Chassis 2 x Driving wheels 4 x Bearing wheels 2 x Tracks (can be changed the length) 2 x DC motor 2 x LED light