Synco Audio WMic-T2 96-Channel UHF Metal Wireless Mic with 2x Tx and Receiver

Contrast to similar devices in the market, WMic-T2 provides a real-time audio monitoring system with a professional 3.5mm output interface. You can test whether it is working normally during recording, to avoid time and energy waste. Besides, with an Energy-efficient LCD Screen, you can check volume, channel, and signal, which is onvenient for parameters setting. Auto-Scanning Channels, Manual or Auto IR SyncFor WMic-T2 with 96 channels, the unique auto-scanning function can help to find the BEST channel quickly, which is super efficient. After the channel scanning, the best channel number will appear on the display screen. Then, you can select the infrared sensor auto match, or manually adjust for matching, convenient and fast with diverse choice. Adjustable RF Signal StrengthAdopting UHF wireless technology, WMic-T2 supports 120m working distance in open areas (80m, in obstacle areas). When the distance is within 60 meters, you can switch the signal strength to "LOW" mode, which helps to reduce power consumption for longer standby time; when working distance is 60-120 meters, please switch to "HIGH" mode, improving the audio recording quality. LCF (Low Cut Filter) ModeAs a professional recording device, Synco WMic-T2 features a LCF mode. LCF (Low Cut Filter)means cutting off the low frequency part for pure and clear output, perfect for noisy environments. However, when you make a field recording, please turn to normal recording mode and get the natural and original sound. A/B Group Fast Switch, No Signal InterferenceSynco WMic-T2 is a full aluminum alloy wireless microphone with one receiver and two transmitters. Compared to previous models, WMic-T2 has a special Button for fast A/B group swith, which is easy to operate and guarantees the smooth stransmisson. All-metal body could not only improve the product's durability, but also greatly enhance the anti-interference ability.96 Channels Used for Multiple Devices Working TogetherIn many noisy places, signal may be disordered causing serious problems for sound pickup. WMic-T2 provides 96 wireless channels for your choice. Using auto-scanning function to find the best channel, you don't need to worry about frequency interference, even multiple devices working together.Working Distance is Up to 120mBy adopting UHF technology, Synco WMic-T2 has a working distance of 120 meters in the open areas; and 80 meters in barrier area, which is superior than many devices on the market. It can realize smooth recording without staccato.Real-time Audio Monitoring System (RAMS)WMic-T2 has the real-time monitoring function, you can test whether it is working normally during recording to avoid time and energy waste. Many other devices in the market don't have the monitoring function, you may get nothing after a long time recording.Two AA Batteries for Power SupplyAA batteries are much more convenient to be replaced. If you find the microphone has run out of battery or when you go to remote rural area for recording, you could easily get a new pair to make the device work normally.Fast and Accurate A/B Group SwitchCompared to previous models, WMic-T2 has a button for A/B group switch. there is no need to select the group in the menu, which may be troublesome and time-consuming. One button works! Elaborate designLCD ScreenWith a LCD screen inbuilt, WMic-T2 displays lots of information, such as signal strength, transmitter power, power indication, audio dynamic bar, power indication, channel number, etc. Convenient for function and parameters setting.Adjustable RF Signal StrengthAccording to different recording condition, the signal strength is adjusstable. For a short distance(within 60m), choose "low" strength mode, to reduce power consumption; For a long distance(60-120m), choose "high" strength mode, to improve the audio recording quality.Mono/Stereo Switchable Output Modeswith mono and stereo audio output modes, WMic-T2 allows you to choose different recording methods in different environments to meet more requirements. It's also convenient for post production.Manual or Auto IR SyncAfter the channel scan, the best channel selection will appear on the display screen. At this time, you can select the infrared sensor auto match, or you can also manually adjust for matching, convenient and fast with diverse choice.LCF (Low Cut Filter) ModeIn a noisy environment, you can choose LCF mode to cut off the low frequency part for pure and clear output. However, when you make a field recording, please turn to normal recording mode and get the natural and original sound.