Swimming Pool Light 120 Degree Light Emission High Brightness Pool Light Uniform Light Emission Outdoor Pool For Courtyard Public Fountain SL-8001

Swimming Pool Light 120 Degree Light Emission High Brightness Pool Light Uniform Light Emission Outdoor Pool for Courtyard Public Fountain SL-8001 Specification: Item Type: Swimming Pool Light Material: ABS+PC+ResinDiameter: Approx. 26.2cm/10.3in Height: Approximately. 4.3cm/1.7in Line Length: Approx. 180cm/70.9in Process: The inside of the lamp body is filled with highly difficult and fully enclosed resin which is water-proof Battery For Remote Control: 1pc 23A 12V alkaline battery Not included Voltage; AC12V Power: 35WLight Color: RGBW Lamp Chips: 2835 SMD lamp chips Number of Lamp Beads: 468pcs LED Luminous Flux: 3500LM Light Angle: 120 degrees LED Life: 50000h Waterproof Rating: IP68Weight: Approx. 1224g/2.7lbs How to Use: 1. Drill 5 holes four screw holes and one wire hole on the wall of the swimming pool. Use 4 screws and 4 expansion screw tubes to install the fixing bracket on the wall of the swimming pool. 2. Pass the 180CM power cord through the wire hole on the wall to facilitate subsequent connection to the power supply 3. Use short screws to fix the lamp on the bracket through the screw holes on the of the product the area around the fixing bracket must be flat and flush with the of the fixing bracket which ensures that there is no between the lamp and the wall. Clearance fit. 4. Disconnect the total current ensure that the is installed in place connect the power cord to the AC12V transformer output line and connect the other end of the transformer to the output power supply 5. Put in one 23A 12V alkaline battery in the remote control not included 5. Turn on the power turn on the lights and complete the installation 6. Pull out the receiving antenna of the remote control to control the light switch color and mode. Package List: 1 x Lamp 1 x Light Fixture 1 x Remote Control 1 x Remote Control Manual 1 x Remote Control Cover 1 x Lamp Manual 4 x Screw 1 x Short Screw 4 x Screw Expansion Tube Note: 1. A 12V transformer is required for installation not included in this package. 2. Please allow 0‑2 cm error due to manual measurement. Thanks for your understanding. 3. Monitors are not calibrated same item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.