Surpass Hobby Rocket V2 LED Program Card for 45A 60A 80A Brushless Waterproof Electronic Speed Controller 1/10 RC Car Ve

Description Brand Surpass HobbyItem Name Rocket V2 LED Program Card Product Size 70 43 13mmNet Weight 24GGross Weight 28GFor 45A 60A 80A 120A 150AInstuctions1 Connect BEC wires with the receiver2 Connect motor wires with ESC3 Turn on the transmitter4 Connect battery pack with ESC then switch on the ESC 5 When the connection of motor and battery is finished the motor emits Beep Beep tone 6 When the throttle stick is in the neutral position the motor re emits Beep Beep tone 7 The ESC is workable Troubleshooting1 If after power on motor can t work no sound is emitted please check the connections between battery pack and motor 2 If after power on LED flashes please check the voltage of battery pack which should be from 5V 13V3 If the motor emits a Beep Beep tone Only please check all the connections BEC wires transmitter and receiver throttle signal wires etc please check the transmitter TH TRIM and adjust it to the motor re emits Beep Beep tone 4 If the car can t be speed up please check either voltage of the battery pack is too low or the temperature of ESC is too high If the voltage of the battery pack is too low please replace the battery pack If the temperature of ESC is too high please check all connections If not please push the button EPA on your remote control 5 If the car stops suddenly while in working state please check the motor s connections and the barrier 5 If the car runs in the opposite direction which the transmitter