Summer Clearance Cafuvv Bathroom Faucet Single Handle Bathroom Sink Faucet Bathroom Vanity Sink Faucets with Faucet Supply Lines 1 Or 3 Hole Chrome

Bathroom Faucet Single Handle Bathroom Sink Faucet Bathroom Vanity Sink Faucets with Faucet Supply Lines 1 or 3 Hole Black Specification: Product Name: Bathroom Faucet Product color: Black Material: H59Copper Net weight: 2.57lbs(1.17kg) Gross weight: 2.97lbs(1.35kg) Product Dimensions: 6.70x5.35x1.57inches (17x13.6x4cm) Packing size: 11.61x7.48x 2.76 inches (29.5x19x7cm) Package Include: 1x faucet 1x sealing ring 1x shank 1x rubber mat 1x washer 1x lock mut 1x cold/hot inlet hose Installation Note: Applicable pressure: 0.05-0.6mpa Aperture: Φ32-35mm/Φ1.26-1.38inch Length of water inlet pipe: 500mm/19.69inch Handle Location: Single-Hole Deck-Mount Nominal pressure: 0.6Mpa Work pressure: 0.05Mpa-0.6Mpa Two flexible Hoses (Hot and cold) and 9/16 OR3/8 female thread V-alve core: Ceramic 1.The main body of the faucet has been tested and adjusted at the factory please do not disassemble it by yourself; 2.Before installing the water nozzle please first remove the impurities and sludge in the pre- embedded water pipe to avoid blocking the water nozzle and affect the water discharge. 3.After installation please confirm the joints are tightly connected and the pipeline without leaking. 4.The size of the tablemounting hole suitable for the installation of this product: Φ32-35mm/Φ1.26-1.38inch 5. When installing and using the water nozzle please use normal torque to prevent the handle screw and other parts from breaking 6. Please open cold water first when using then turn on hot water to adjust temperature to avoid burns; all kinds of water nozzles are adjusted according to red and blue signs red is hot Water direction blue is cold water direction and your double pipes should be installed coordinate with these. 7. Users should protect the faucets if as cement lime slurry sand that contaminates the surface .It must be cleaned within 30 minutes. 8. Important: Before supply lines connection please turn on hot and cold water supplies and flush water lines for one minute. This flushes away any debris that could cause damage to internal parts. And then you can connect supply lines and slowly turn on the water check all the connections for leaks.