Stepper Motor Driver Controller Speed Regulator Pulse Generator PWM Generation Controller

Description Stepper Motor Driver Controller Speed Regulator Pulse Generator PWM Generation Controller without Magnet Specifications Type Stepper Motor Driver ControllerSize Approx 73 51 37mmController Frequency Signal High 5 8KHZ 127KHZ Middle 590HZ 15 8KHZ Low 82HZ 2 3KHZFrequency Measurement PULGND 2 PortsPower Input 15 160VDC Recommended to use 12VDCQuantity 1pcs Features 1 This module is a pulse generating module which is supplied as a signal to a stepping driver If you want to control a stepper motor you must also be equipped with a driver This simple controller stepper drive stepper motor DC power supply can form a simple control platform 2 PUL and PUL are the positive and negative of the pulse EN and EN are the positive and negative of the enable terminal DIR and DIR are the positive and negative of the direction Connect these 6 lines to the 6 ports corresponding to pulse direction and enable of the driver Note that if you want to use the open or stop function the ENA enable terminal on the controller must be connected to the driver with a common cathode or common anode 3 2 groups of power input 2 groups only need to connect to one power supply One group is the power supply connected to DC 15 160VDC recommended to use this group of power The other group is 12VDC If it is powered by 12VDC the power supply is connected to 5 12V in and the power supply is negative to common cathode 4 The motor s forward and reverse rotation an