Static Grass Flocking Applicator Set Plastic Flocking Applicator with Antiskid Handle DIY Scenic Modelling Sand Table

Using Steps: Charge the battery before using and check if the wire inside the container is in contact with the wire mesh. This is the pitch control button. Put in the grass powder. It has been suggested that the length of the grass powder is more than 5 mm which is more effective. Then tighten the lid. On the target model and on the table pull out the white latex and spread it evenly ready to start dusting with grass powder. Contact the target surface of the platform with the negative electrical connector as close as possible then use the seeder grass to start spraying the grass powder 2-3 cm from the platform target. After the grass dust is completed pour the grass powder or powder supplement and blot it with a vacuum cleaner model. Cut the haystack with small scissors and a toothpick until it grows evenly. Type: Garden Tool Parts Model Number: Grass Flocking Applicator Usage: Home DIY Name: Static Grass Flocking Applicator Set Battery: 2 x AA battery (excluded) Rated working voltage: DC 3V Rated working power: 0.15W Rated output voltage: greater than equal DC4000V Rated working current: 50mA colour:Black Material:plastic Package Contents: 1 x Applicator 1 x brush 1 x grass powder(30g) Only the above package content other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.