Solar Water Tank Water Tower Pool Automatic Water Level Controller Plastic Float Ball Valve Water Stop Water Level Switch

and High Quality This valve is the replacement of the float ballcock which can be applied to various systems of high water tanks pools water towers of the industry and civil construction etc. Automatic control low -complementary water water full automatic stop.Four intakes volume of water Beautiful appearance small size practical simple installation.Without easy to long life low failure rate saving water resources When the pool or tank water levels the valve body will sink and then the forerunner of the control valve will be opened. As the pipe water pressure affects the seal face of control valve will be opened. Finally the water comes out and Specifications: Type: Upright Inner Installation Working pressure range: 1-10KG(0.1-1MPa) Applicable Medium: clean water Applicable Medium temperature: less than equal 70° Resistance to high temperature medium temperature: 70°~120° Outlet Diameter: G1/2 Size: 100.2x58x50mm : 1 Pc color: White material: plastic Package Contents: 1*Water level control valve Note: This production belongs to the liquid level control valves. When installed the float must be vertical. if you need to install from the top a Elbow needed to the float valve and the inlet line. Firstly the feed line should be fixed in horizontal plane and then the automatic water level control valve on the water inlet according to the standard. The main water inlet should be lined with the control valves Normal Diameter. When using the globe valve should be all open. If two valves are installed in the pool the two valves should be in the horizontal plane. Before installing please clean the impurities in the pipes in case of blocking. If the water quality is not good then the valves need to be maintained properly. If the users find the time of adding water becomes he can just upload the water inlet and make it washed Only e above package content other products are not included. Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.