SmallRig Full Camera Cage Kit w/Cool-Ballhead-V1 Ballhead for Sony A7RIII/A7III

SmallRig Camera Cage Kit 2103 is exclusively designed for Sony A7RIII. It includes 4 parts, namely Double End Ball Head 1135, Cage 2087, Safety Rail 1409 and NATO Handle 1955. NATO Handle 1955 could be mounted on Safety Rail 1409 for handeld shooting. It is equipped with an abundance of threaded holes and cold shoes for additional attachment. It could be easily adjusted forwards and backwards for the balance of the rigs.
Double End Ball Head 1135 comes with a shoe adapter on the one end and a 1/4" screw on the other end. It enables to mount monitor, wireless video transmitter and microphone etc. It provides multiple choices for the cameraman based on the needs. Cage 2087 is exclusively designed for Sony A7RIII. It does not block any access to battery compartment, ports and slots of camera. It fits the camera perfectly and serves for anti-twist purpose. In addition, it comes with arrays of 1/4"-20 and 3/8"-16 threaded holes for DIY operations.


- Camera Cage -SmallRig Cage for Sony A7RIII/A7M3/A7III 2087 mounts to the camera by a 1/4"-20 screw and a M2.5 screw on the right side, preventing twists and wiggles. It is formfitting and does not block camera's buttons and dials. Around the cage are multiple mounting points including a cold shoe, 1/4"-20 & 3/18"-16 threaded holes and Arri locating holes. On the base plate are embedded with rubber pads to prevent scratches and twists. Attach SmallRig HDMI Clamp 1679 to protect the HDMI cable. Around four corners are openings for wrist and neck straps. The cage also features sensor centering mark and focal plane mark.

Features
• Formfitting cage designed for Sony A7RIII/A7M3/A7III; 2.Securely locked by a 1/4"-20 screw and a M2.5 screw. 3.Built-in cold shoe, 1/4"-20 & 3/18"-16 threaded holes and Arri locating holes
- Cool-Ballhead-V1 Double End BallHead -Cool-Ballhead-V1 is a Multi-Function Double Ball Head on both ends with shoe adapter and 1/4" screw. Cool-Ballhead-V1 can Mount Monitors and led Lights to DSLR, 180o Articulation. 1/4"-20 Screw on Top.It can be mounted directly to a DSLR or camcorder's shoe mount, and allows for the attachment of a full array of video accessories. Used to attach monitors or small lights to your camera while shooting video, this ball head has a single locking knob for fast and safe operation.

- NATO Handle -SmallRig DSLR Action NATO Handle 1955 is a sliding top handle for moving shoots. It is designed for quick release attaching and detaching on the camera without screws. Simply slide onto Safety NATO Rail and tighten down the thumbscrew. E cept for sliding it from left to right on the Rail to keep your camera balanced, you can also slide it forwards and backwards to find the balance point of your rigs.The handle is equipped with three shoe mounts on the top, in the front and at the back respectively, to which the light accessories, such as microphone, magic arm, could be attached. This handle is equipped with the hole pattern for ARRI accessory mount pins, so you can attach ARRI compatible e tension blocks. The grip provides 1/4" & 3/8" mounting points for additional accessories. Additionally, we specially offer a 1/4" spanner for free access. It is quite convenient when you need to improve the camera and rigs balance.
Features• Sliding left and right on the Rail to keep your camera balance
• Slide forwards and backwards to find the balance point of your rigs
• Built-in Shoe mounts on the top, front and back
• 1/4"-20 & 3/8"-16 mounting points for additional accessories
• ARRI locating hole for attaching ARRI compatible e tension blocks
• With a 1/4" spanner for quick use- Quick Release Safety Rail -
46mm standard quick release safety rail is part of our QR-Handles, The spring-loaded pin on each end of the rail prevents accidental accessory detachment.