SmallRig 2126C Professional Accessory Kit for Canon C200 and C200B

SmallRig Professional Accessory Kit 2126 is exclusively designed for Canon C200 and C200B. It could offer lots of additional attachment options and enables the camera to release its potential to the utmost.SmallRig Professional Accessory Kit 2126 is exclusively designed for Canon C200 and C200B. It supports run-and-gun, handheld shooting, and it could be mounted with dual 15mm rods and enables EVF bracket adjustment. It allows a quick switch to tripod shooting, run-and-gun shooting, and handheld shooting to cater to the needs of cameramen.- SmallRig Baseplate for Canon C200 and C200B 2076 -SmallRig Baseplate 2076 is exclusively designed for Canon C200 and C200B. It includes an Arca QR plate on the top and a base plate(with ARRI dovetail groove) at the bottom. It could offer lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of the cameraman during shooting.Arca QR plate on the top attaches the bottom of the camera via 4 screws for a firm attachment. It is equipped with 1/4"-20 and 3/8"-16 threaded holes for QR plates at the bottom. It could be detached from the baseplate for QR plates of other standards, thus it could be switched to other modes, such as in dollies and cranes.The baseplate is anti-off designed, thus it prevents the camera from accidental removal. It comes with dual rod clamps for 15mm rods whereby lens support, follow focus, matte box, etc. could be attached. Arri dovetail groove at the bottom could attach the Arri QR plate and then sit on the tripod. It is also equipped with 1/4"-20 and 3/8"-16 threaded holes at the bottom for DIY operations.Features• It is exclusively designed for Canon C200 and C200B.• Arca QR plate could be mounted on the baseplate in the drop-in style.• It comes with dual rod clamps for 15mm rods whereby lens support, follow focus, matte box, etc. could be attached. 85mm rod height is ensured.• The baseplate that comes with Arri dovetail groove at the bottom fits the Arri QR plate for a tripod; it is also equipped with 1/4"-20 and 3/8"-16 threaded holes for QR plates of other standards.• The pressing part will not drop accidentally even the wingnut loses- SmallRig Top Plate for Canon C200 Camera 2056 -SmallRig Top Plate 2056 is specifically designed for Canon C200 Camera. It could provide more mounting possibilities based on your needs during shooting. It features gear racks to mount accessories with gear racks with anti-twist purposes.SmallRig Top Plate for Canon C200 Camera 2056 could be applied in many shooting scenarios with the gear racks on the top and at the side. It could be mounted on the top of the camera via two 1/4" counterbores.It could attach the original top handle of Canon C200 camera with 1/4" threaded holes and gear racks placed in the center of the top. Accessories with gear racks with anti-twist purpose, like EVF Bracket for Canon C200 Camera 2064 could be mounted on the front side, while on the right side are two M4 threaded holes to attach the original microphone bracket of Canon C200. Arri locating points on the top could attach Anti-rotation Magic Arm Adapter 1978 for magic arm and then monitor. In addition, it is equipped with 1/4"-20 and 3/8"-16 threaded holes for DIY operation as per your needs in different scenarios.Features• It is a top plate exclusively designed for Canon C200 Camera.• It could attach the original top handle of Canon C200 camera with 1/4" threaded holes and gear racks placed in the center of the top.• EVF Bracket for Canon C200 Camera 2064 could be mounted on the front side.• Two M4 threaded holes on the right side are utilized to attach the original microphone bracket of Canon C200.• It comes with 1/4"-20 and 3/8"-16 threaded holes on the top for DIY operation.- SmallRig Sun Hood for Canon C200 -SmallRig Sun Hood 2085 is exclusively designed for Canon C200.It protects the Canon C200 monitor from direct sunlight while shooting outside. It could be mounted on the monitor with great ease with the help of magic fasteners. It folds flat for storage and transport. It weights only 38g.Features• It fits the monitor tight and blocks the sunlight while shooting outside.• It does not block any buttons and ports on the left side of the monitor. Meanwhile, it supports touch-screen operation.• It features quick attachment and detachment and It folds flat for storage.- SmallRig Rosette Handle Kit-SmallRig Rosette Handle Kit 2002 is designed for the shoulder system to assist camera shooting. Adapt to a 15mm rod system, rosette handle, and rosette arm can be adjusted independently, and both can rotate 360 Degree . The rosette arm has 1/4"-20 threads and an Arri locating hole, which can attach to accessories such as magic arm 2115. The ergonomic design makes the handle kit comfortable to use & easy to store.- Shoulder Pad with 15mm RailBlock -SmallRig Universal Shoulder Pad with 15mm RailBlock 2077 is exclusively designed for universal cameras, be it large or small. It is the perfect choice for DSLR, mirrorless cameras and small cameras. It includes Universal Shoulder Pad 2057 and 15mm RailBlock 942. It offers an abundance of possibilities for the cameraman as per the needs during shooting, thus it is very beneficial and convenient for the cameraman. 15mm RailBlock 942 could could be mounted on the top of Universal Shoulder Pad 2057 and then 15mm Rod 1053 for Multipurpose U-Base 1674 and Handle Grip 998 for run-and-gun(mainly for small camera), and during the process the balance could be adjusted for better operation.Universal Shoulder Pad 2057 could be mounted in the front with 15mm RailBlock 942. Shoulder Pad 2057 could attach big camera on the top, thus balance of camera could be adjusted on the shoulder.Universal Shoulder Pad 2057 could be mounted at the rear with 15mm RailBlock 942 and then 15mm Rod 1053 for Battery Back 1547 and V-Lock Assembly Kit 1846 whereby big battery could be mounted. It is very convenient to adjust the balance during run-and-gun shooting.In addition, it is equipped with an abundance of 1/4"-20, 3/8"-16 and M4 threaded holes together with Arri locating points for DIY operation.Features• It offers comfortable run-and-gun shooting experience for the cameraman.• It could be operated with SmallRig products for DIY options to meet the personalized needs with minimum weight and reasonable price.• It is flexible and compatible with both big and small cameras.•It features in light weight and weights only 302g.- 2pcs 15mm Black Aluminum Alloy Rod(M12-45cm) 18" -Includes 2pcs of 45cm long industry-standard 15mm rod. There is an inner M12 thread on each end of the rod so that you can extend the rod with a M12 threaded rod.