SmallRig 2096 Camera Cage Kit for Sony A7R III/A7III
SmallRig Cage Kit 2096 is designed for Sony A7RIII. It offers great protection and lots of additional attachment options for the cameraman. It enables the camera to release its potential to the utmost as per the needs of cameraman during shooting.It includes A7RIII Cage 2087, HDMI Lock 1679, NATO Rail 1409 and NATO Handle (Rubber) 2005.NATO Rail 1409 is mounted on A7RIII Cage 2087, and NATO Handle (Rubber) 2005 is mounted on the top of NATO rail for handheld shooting. It is ergonomically designed and it offers a very enjoyable handheld experience with rubber part on it. It features quick release and attachment and it is tightened by a wingnut.ARIII Cage 2087 comes with lots of ports and controls for different shooting scenarios based on the needs of cameraman. It fits the camera perfectly and serves for anti-twist purpose.The A7RIII cage could be mounted with HDMI Lock 1679 on the left side to prevent HDMI cable from accidental loosening and and avoid the loss of video signals during transmission.- Sony A7RIII Cage -SmallRig Cage for Sony A7RIII/A7M3/A7III 2087 mounts to the camera by a 1/4"-20 screw and a M2.5 screw on the right side, preventing twists and wiggles. It is formfitting and does not block camera's buttons and dials. Around the cage are multiple mounting points including a cold shoe, 1/4"-20 & 3/18"-16 threaded holes and Arri locating holes. On the base plate are embedded with rubber pads to prevent scratches and twists. Attach SmallRig HDMI Clamp 1679 to protect the HDMI cable. Around four corners are openings for wrist and neck straps. The cage also features sensor centering mark and focal plane mark.- HDMI Lock -SmallRig Sony A7II/A7RII/A7SII/ILCE-7M2/ILCE-7RM2/ILCE-7SM2 HDMI Lock 1679 is specially designed for Sony A7II half cage 1673 and Sony A7ii Cage 1660. Attached to the cage with two 1/4"-20 screws, it prevents HDMI cable from accidental dropping. Moreover, this HDMI lock is equipped with two M5 threaded holes to lock USB Cable with screws.- NATO Rail -46mm standard quick release safety rail is part of our QR-Handles, The spring-loaded pin on each end of the rail prevents accidental accessory detachment.Work WithCompatible with our SlideMount, also w/ RED Epic/Scarlet, Black Magic Camera and so on, and other third party accessories.- NATO Handle (Rubber) - SmallRig QR NATO Handle (Rubber) 2005 can be used on the Scarlet and Epic cameras, Blackmagic cameras with NATO Style Rails mounted underneath. This Handle features a cold shoe mount on the top to mount standard shoe accessories. The NATO handle is designed for quick attaching and detaching on the camera without screws. Simply slide onto Safety NATO Rail and tighten down the thumbscrew. You can slide it left and right on the rail to keep balance.
