Simple Deluxe 100W Infrared Ceramic Reptile Heat Lamp Bulb & 150W Clamp Light with 8.5 Aluminum Reflector Combo for Amphibian Pet

Infrared Ceramic Reptile Heat Bulb: Specifications: Socket: E26; Volt: AC 110-120V; Watts: 100W; Material: ceramic NiCrAl; The diameter of heating surface: 85mm; Note: 1. Lamp surface temperature is too high do not directly touch during it works; 2. Before removing it from the fixture please allow at least 1 hour for cool to avoid scald ; 3. Accidents may happen due to improper operation so please use it in the right way and avoid using it in a damp environment; 4. Please adjust the distance between the lamp and the pets at least 35cm; 5. Please away from combustible or explosive materials； Clamp Light: Specification： Volt: 120V; Watt: Accepts up to 150W bulb (E26); Reflector Diameter: 8.5 inch; Cord: 6 feet; 18/2 SPT-2 cord clamp light can also be used as a table lamp in your room garages or art studios a work light in photography and workshops amphibians and reptiles pets terrarium heat lamp and even a growth light for indoor plants. Warning: The power cord on this product contains chemicals including lead is known to the State of California to cause cancer. Wash hands after use. Digital Thermostat Controller: Specifications: Temperature control range: 40℉-108°F; Temperature display range: 32℉-140°F; Rated Voltage: AC 120V 60Hz ; Max Loading: 8A 1000W ; Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug. A digital thermostat can also be used to control the temperature of many other appliances as long as they don t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into the thermostat and set the desired temperature. Abnormal Warning: 1. If the thermostat shows E1 it means that the actual temperature is lower than 0℃ or 32℉; 2. If the thermostat shows E2 it means that the actual temperature is higher than 60℃ or 108℉. 3. If the thermostat shows E3 it means that the temperature sensor is not working properly. Please re-install the sensor；