Shaft Encoder Encoder 30Khz Corrosion-Resistant AB Two-Phase For Office Diverse Working Environment 200B

Shaft Encoder Encoder 30Khz Corrosion-Resistant AB Two-Phase for Office Diverse Working Environment 200B Specification: Condition: 100% Brand NewItem Type: Encoder Material: Aluminium + PlasticColor: Black + SilverShaft Diameter: Approx. 6mm/0.23in Working Voltage: 5-24V DC Comprehensive Speed: 3000-6000 Rpm Maximum Corresponding Frequency: 30KHZ Number of Phases: AB Two-Phase Cable Length: Approx. 145cm/4.76ft Package List: 1 x Encoder 3 x Screws 6 x Gasket Note: 1. This product is composed of components so please be careful not to drop it. 2. When installing if the eccentricity or deviation angle is too large it will shorten its service life. 3. Do not use in strong impact vibration corrosive large magnetic field high temperature high humidity and acid-base environment. 4. An error in the number of pulses may be caused when the power is turned on or off. After the power is turned on there is a 0.5S delay time for use. 5. After the product is fixed do not pull the cable with a force exceeding 29.4N 6. When there is a high-voltage line or power line nearby please use a conduit to cover the cable. 7. When wiring pay attention not to short-circuit the terminals and ensure that the wiring is correct. Wrong wiring will damage the internal circuit. It is recommended to insulate the unconnected terminals. 8. wire should be grounded. 9. Do not disassemble the product by yourself.