Self Adhesive Multi-Purpose Hooks Wall Mounted Mop Organizer Holder Storage Racks Brush Broom Hanger

Parts List: 1* Mop Holders Highlight description: 1.During installation the adhesive should not touch water or other objects. 2.Used for the load-bearing range of the broom and mop holder. The maximum load weight is up to 20 pounds. 3.Strong adhesion suitable for use on wood plastic ceramic tile metal glass and other surfaces 4.Rough or textured drill bits are also suitable. The surface of other objects is too fluffy or irregular It should be used with caution. 5.No drilling design to prevent the rack from damaging the walls of the house. There is a layer of adhesive on the back of the broom and mop holder which can be installed in a few seconds. 6.Waterproof super adhesion. Suitable for use on wood plastic ceramic tiles metal glass and other surfaces. There is a non-slip mat in the middle of the broom and mop holder. Within the load range firmly grasp the object not easy to slip. 7.2 screws for mop and broomstick can be directly attached to the wall and self-adhesive. The high elastic buckle and petal-shaped gear design can hold mops and brooms of different sizes or other accessories. 8.With high viscosity and durability you can use these stainless steel mops and broom holders to take anything you want to hang without dropping. 9.Self-adhesive mop rack hanger organization is suitable for home kitchen garage garden bathroom office and any place where it is needed. You can use the broom mop holder to organize mops and brooms or other items which not only saves your space but also makes your home more tidy. Detailed description: Material: polypropylene + polyvinyl chloride Double row size: 18*7*5cm/7.01*2.76 inches Single row size: 7*7*5cm (Due to the manual measurement there will be an error of 1-3 cm.) Maximum load: 5KG(Due to the manual measurement there will be errors.) Description: 1. Clean the walls make sure to remove dust grease water etc... 2. After removing the protective film the adhesive film can be directly adhered to the wall. 3. Gently press with your hand to make the broom and mop holder completely touch the wall.